Type to search

Fix Driver Verifier Detected Violation Windows 10 With Top Solutions

While trying to reboot your computer, you might find a blue screen of death and receive an error message that the driver verifier detected violation Windows 10. This error generally occurs due to the hardware failures, but there might several other factors as well. This error might slow down your system and cause problems with the other applications as well. Therefore, it is essential to know the actual reasons behind this error and fix it as soon as possible.

Best Working Ways to Fix Driver Verifier Detected Violation Windows 10

Check out the possible causes of the driver verifier detected violation Windows 10 along with their solutions:

Update the Windows

Update the WindowsSometimes an older version of Windows might force the driver verifier to detect a violation with Windows 10. So, keep your Windows up-to-date by the following steps:

  1. Open the Control Panel and click on ‘Windows Update’.
  2. Windows starts checking for any latest updates and notifies you if such an update is available.
  3. Click on the ‘Install’ button to update your Windows to its latest version.
  4. After updating the Windows, you might come across other updates.
  5. Hence, tap the ‘Install button to install the other sets of updates as well.
  6. Now, restart your PC and check whether you are facing the Driver Verifier Detected Violation Windows 10 or not.

Update the Drivers

Update the DriversUpdate the drivers if the problem persists even after updating the Windows:

  1. Go to the Start menu and search for Device Manager.
  2. Open Device Manager and find out your device.
  3. Right-click on it and select ‘Update Driver.’
  4. Then, let Windows search automatically for updated driver software and install it on your PC.
  5. If Windows cannot find an updated driver, then you will need to do this task manually.

Uninstall or Temporarily Disable Antivirus

Uninstall or Temporarily Disable AntivirusLaunch Device Manager and select the antivirus installed on your PC. Then, right-click on it and choose ‘Uninstall’. Click ‘OK’ in the pop-up dialog box to confirm the action. Repeat this process if you have more than one antivirus installed on your PC. After uninstalling the antivirus entirely, restart your PC and you are not going to encounter the Blue Screen of Death.

Perform Automatic Repair using Windows Bootable Media

Perform Automatic Repair using Windows Bootable MediaTry out an automatic repair as this solution has worked with several users.

  1. To do that, insert the Windows bootable DVD or USB flash drive and restart your PC.
  2. If the setup Windows does not appear automatically, then press ‘F8’ or ‘F10’ to choose the boot option.
  3. Now select either the DVD or USB drive.
  4. Then choose the language, time, currency, and keyboard input on the setup window and tap the ‘Next’ button.
  5. Choose ‘Repair your computer’ and navigate to the ‘Troubleshoot’ menu.
  6. Click on ‘Advanced Options’, choose ‘Automatic Repair’ and select the Operating System installed o your PC.

Enter the Safe Mode

Enter the Safe ModeThe Safe Mode uses only some basic drivers and software and hence fixes the drivers or software issues. Hence, enable the Safe Mode by the following steps and try to fix the issue.

  1. Choose ‘Repair your computer’ as you have in the previous solution and select the ‘Automatic Repair’ option.
  2. Then, go to the ‘Troubleshoot’ tab and click on ‘Advanced Options.’
  3. Tap ‘Startup Settings’ and hit the ‘Restart’ button.
  4. As your PC restarts, a list of options appears automatically on your PC.
  5. Press ‘5’ or ‘F5’ and select ‘Safe Mode with Networking’.
  6. Note that your PC will work correctly if the error was occurring due to certain software.

Downgrade the Graphic Card Drivers to Their Older Version

Downgrade the Graphic Card Drivers to Their Older VersionSometimes, the latest version of Graphic card drivers might have bugs and cause errors. Hence, roll back to the previous version of the drivers and check whether it solves the issue or not.

  1. So, press Windows key and ‘X’ to bring up the Power User Menu.
  2. Select Device Manager from the list and double click on your Graphic card driver.
  3. Move your way to the ‘Driver’ tab and choose the ‘Roll Back Driver’ option.
  4. Wait for some time until the process is finished.
  5. In case if you are unable to revert to the older version, then you can uninstall the driver alternatively.
  6. To uninstall the driver, download a third-party display driver uninstaller.
  7. Then, launch the program on your PC and run it to uninstall the Graphics Card Driver.
  8. After completing the process, visit the Graphic card manufacturer’s website and download an older version of the driver.

Reset Windows 10

Reset Windows 10This process is similar to a clean install that might resolve the software glitches.

  1. Backup all the important files in the C Drive of your PC.
  2. Make sure that you have the Windows 10 installation media otherwise, you will need to create it with an empty USB flash drive.
  3. Restart your PC a few times during the boot sequence and select ‘Automatic Repair.’
  4. Then click on ‘Troubleshoot,’ choose ‘Reset your PC” and select ‘Remove everything.’
  5. When prompted, insert the Windows 10 installation media.
  6. Choose ‘Only the drive where Windows is installed’ and select Just remove my files’.
  7. Tap the ‘Reset’ button and follow the on-screen wizards to reset the Windows.
  8. If BSOD error appears even after this reset, then you shall need to check the hardware.

Check the Hardware

Inspect whether the RAM, hard drive, motherboard, and other components of your PC is working properly. Apart from this, check the built-in fans of the CPU as they occasionally cause  Driver Verifier Detected Violation Windows 10 error. If you detect any hardware faults, then avail technical support or replace these parts.

Reset the Driver Verifier

Reset the Driver VerifierGo through these steps for how to disable driver verifier Windows 10.

  1. Type ‘cmd’ in the search box and press ‘Enter’ to launch Command Prompt.
  2. Right-click on the Command Prompt as Administrator and enter ‘verifier’ into the elevated command.
  3. When the Driver Verifier Manager opens, check the box for ‘Delete existing settings’.
  4. Click on ‘Save’ to apply the changes and restart your PC.

Run the System File Checker

Run the System File CheckerThis inbuilt tool of Windows is highly effective in scanning your PC and fixing the corrupted system files.

  1. Therefore, search for Command Prompt and right-click on it to run it as an Administrator.
  2. Then enter ‘sfc/scannow’ in the Command Prompt and press ‘Enter’ to run the System File Checker.
  3. The tool scans your PC and fixes the glitches in system files.
  4. Restart your PC when the process is completed.

Run the DISM Command

Run the DISM CommandIt is a more advanced tool for resolving various system errors. Hence, use this tool, if the System File Checker fails to fix the glitches.

  1. Open Command Prompt as Admin and enter the ‘DISM.exe /Online /Cleanup-image /Restorehealth’ command in it.
  2. Use the Windows installation DVD or USB in case the DISM is unable to obtain files online.
  3. After inserting the DVD or USB, copy paste the command, ‘DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:\RepairSource\Windows /LimitAccess.’
  4. Replace the ‘C:\RepairSource\Windows’ path in order to resolve the system errors.

Scan Your PC for Viruses or Malware

Scan Your PC for Viruses or MalwareDriver Verifier Detected Violation Windows 10 might emerge if a virus or malware is present on your PC. This problem can arise only when your PC does not have security software like Windows Defender installed on it. Therefore, install a scanning tool and perform a detailed scan of your system. If the scanning results detect a malicious program, then run the particular security software to get rid of them.  

Uninstall Virtualization Software

Uninstall Virtualization SoftwareVirtualization software like VirtualBox, VMware, and so on are the know factors leading to driver verifier detection violation error. So, uninstall if your PC is having such software. Then, install another virtualization program and download its latest version on your PC.

Check for Hardware Failures

Press Windows logo key and ‘R’ to launch the Run application. Type ‘mdsched.exe’ in it and click ‘OK.’ The command scans your PC and detects if hardware failures are detected. You can then, take the necessary measure to fix them

Manage Driver Verifier Windows 10

  1. Manage Driver Verifier Windows 10At first, open Command Prompt as Administrator, type ‘Verifier’ in it and press ‘Enter.’
  2. When the Driver Verifier Manager desktop application pops up, delete the existing settings and click on the ‘Finish’ button.
  3. Reboot your PC and enter the password to log in and start the Windows normally.
  4. If the error repeats itself, then follow this process once again.

Hard Reboot Your PC

It is the final trick you can apply if the problem continues even after applying so many solutions. Unplug the power cable and shut down your PC or press the Power button to turn it off. Leave it in this state for a few minutes and then plug in the power cable. Press the ‘Power’ button to restart your PC and hope you are not going to face that BSOD error after this hard reboot.

This article has provided you with enough solutions and we hope one of them is definitely going to work for you. The only thing that you have to do is to identify the actual reason behind the Driver Verifier Detected Violation Windows 10 error and apply the appropriate way out.