Windows

Troubleshoot The DNS Server Isn’t Responding Issue With Some Brilliant Technical Hacks

Troubleshoot The DNS Server Isn’t Responding Issue With Some Brilliant Technical Hacks

One of the most general as well as frequent issues that a maximum number of Windows 10 users face whenever attempting to access the internet is DNS server isn’t responding problem. In case, you are not aware, the Domain Name System or DNS is a directory of reports for the web and qualified for interpreting the address of the web which is human-readable such as google.com to the system logical address of the Internet Protocol. Sometimes, the Domain Name System or DNS server may not act properly as it should. Thus, you are unable to use or access the internet. Due to the necessity of the DNS server on the system, the web browser doesn’t comprehend where to run whenever you enter the web address in the browser search box.

Effective Methods to Overcome the DNS Server Isn’t Responding Issue:

In case, if you are suffering from this technical error ‘DNS server isn’t responding Windows 10’, then chances are that the default Domain Name System or DNS server of your Internet Service Provider (ISP) might be misconfigured in your settings, Thus, move to the new server, perhaps server is temporarily down but don’t worry. Whatever be the generic cause of this technical error confronted. Here, in this post, we have enlisted some effective technical hacks to eradicate the DNS server isn’t responding issue on the Windows 10 Operating System effectively.

Way 1: Correct your Domain Name System or DNS Server Address

You may encounter this issue due to plenty of reasons. The incorrect DNS server address may be one of the causes behind this most frequent issue of the Windows 10 Operating System. Thus, you need to follow some easy steps to correct your DNS server address on the system.

Steps are:

The steps are stated hereunder.

  1. At first, you need to press and hold down the Windows key. At the same time, press and hold down the R Key on your keyboard. This process will open the Run box on the system. Now, you need to write the ‘Control’ in the Run box and tap on the OK button. Otherwise, you can press the Enter key on your keyboard to proceed further.
  2. Now, you will get a list of options. Tap on the Network and Sharing Center in the Large icons.
  3. After that, you need to tap on the Change Adapter Settings.
  4. Click (Do Right-click) on the Ethernet, Local Area Connection or Wi-Fi as per to your Windows. After that, you need to tap on the Properties option.
  5. Next, tap on the Internet Protocol Version 4 (IPv4/TCP) option from the Properties. After that, again choose the Properties option.
  6. Now, tick the checkbox ‘Obtain an IP address automatically’ option.
  7. Tick the checkbox ‘Obtain DNS server address automatically.’ After that, select the OK button.
  8. Further, you need to select the Internet Protocol Version 4 (IPv6/TCP) option from the Properties. After that, again choose the Properties option.
  9. Now, tick the ‘Obtain an IP address automatically’ option.
  10. Tick the checkbox of ‘Obtain DNS server address automatically.’ After that, tap on the OK button to proceed further.
  11. Now, you can try to access the internet.

In case, if the DNS server is still not responding on the system, then you should move out to the next troubleshooting method.

Way 2: Clear the Domain Name System or DNS Cache and Reset your Internet Protocol Address

This is one of the most effective methods that you must try to fix this issue on your own. Moreover, the maximum number of Windows 10 users fix this issue by clearing the DNS cache and reset your Internet Protocol address on their system. Hence, to perform this method, go through the following section.

  1. At first, you need to go to the Start menu of the system. Tap on the Start menu to open the search box. Write ‘cmd’ in the search box. After that, you need to hit the Command Prompt option to choose the Run as Administrator option.
  2. Next, tap on the Yes option whenever prompted by the user account control.
  3. Now, you need to write the following commands on the open black screen. The commands are ipconfig /flushdns, ipconfig /registerdns,  ipconfig /release and ipconfig /renew.
  4. After that, press down the Enter key on your keyboard after each command.
  5. Once all the above-described steps are completed, then you need to restart the system.

Finally, check the system to verify that the issue is resolved or not. In case, if the issue still persists, then move out to the next solution to fix this issue.

Way 3: Change the Domain Name System or DNS Server Manually

By changing the Domain Name System or DNS server manually, you can easily fix this issue on your own. You must change the DNS server of the system to Google DNS or OpenDNS. This way is a pretty inane stepwise procedure and you can execute it by going through the below described easy steps. The steps are as follows:

Steps are:

  1. At first, you need to open the Network Connections on the system. Alternatively, there is a way that you can try to open Network Connections. Press and hold down the Windows key and at the same time, press and hold down the X Key on your keyboard. This process will open the Network Connections option on the system.
  2. Now, you need to locate your network connection. Right-click on it and select the Properties option from the menu.
  3. Whenever Properties screen opens, choose the Internet Protocol Version 4 (TCP/IPv4) option and tap on the Properties option.
  4. Next, you need to choose the Use the following DNS server addresses option from the Properties menu.
  5. As Favored DNS server enter 8.8.8.8.  On the other hand, you oblige to enter 8.8.4.4. as for Alternate DNS server. In case, if you require, you can also utilize 208.67.222.222 as Preferred and 208.67.220.220 for Alternate Domain Name System or DNS server.
  6. Once the above-mentioned steps are completed, tap on the Ok button to save the changes that you have made.
  7. There is also an optional option that you can try for good measure. Just disconnect the system from the internet and connect back it again.

Finally, check your system if the problem is resolved or not, after changing the DNS server. In case, if the issue still persists, then move out to the next solution to fix this issue.

Way 4: Install the Latest Drivers on the System

Generally, the network adapter relies on the driver of the system in order to act correctly. In case, if any issues with the adapter, then it might be because of the drivers of the system. The driver of the system might be contaminated or automatically updated and this can sometimes spell DNS server isn’t responding Windows 10 issue. To resolve this issue, you need to follow-through the below-stated steps.

  1. At first, you need to press and hold down the Windows key and at the same time, press and hold down the X Key on your keyboard. This process will open the list of options.
  2. Next, select the Device Manager option from the list of options.
  3. Locate the network adapter option whenever the Device Manager opens. Right-click on it and select the Uninstall option.
  4. A confirmation dialog box will now appear. If available, indicate to Delete the driver software for this system. After that, you need to tap on the Uninstall option.
  5. Whenever the above-mentioned steps are completed, you need to restart the system.
  6. Next, the default network driver will be installed, whenever the system restarts.
  7. After that, you need to check the system to verify if the issue is resolved or not.

Way 5: Perform the netsh Command

According to the many Windows 10 users, you can easily fix this technical error on the system by executing some commands from the Command Prompt. To do so, you just need to follow some easy steps. The steps are as follows:

  1. At first, you need to open a Command Prompt as an Administrator.
  2. Now, enter the following commands and press the Enter key on your keyboard after each command.

netsh int ip reset, netsh winsock reset, ipconfig /flushdns and ipconfig /renew.

  1. Now, you need to reboot the system.

Now, you can try to access the internet and check your system to verify that the issue is fixed or not. If it hasn’t resolved yet, then don’t get annoyed. There is infinite where that came from. Go through the next troubleshooting method and hope for the best.

Way 6: Start the System in Safe Mode

In case, you are getting the DNS server isn’t responding error on the Windows 10 Operating System, then there is an effective way that you try to get rid of this annoying issue. You can try to access the internet on the system in the Safe Mode. Moreover, it is not a troublesome task. To perform it, follow the below-mentioned easy steps.

  1. At first, you need to go to the Start menu and tap on it to open.
  2. Next, select the Power button from the Start menu.
  3. You need to press and hold down the Shift key on your keyboard and tap on the Restart option.
  4. Now, you will get the three options. You need to select the Troubleshoot option from the three options.
  5. Tap on the Advanced option and after that, you need to choose the Startup Settings.
  6. Select the Restart button to proceed further.
  7. Now, the restarting process will begin and you will get a list of available options.
  8. You need to choose the Safe Mode option from the list of available options with Networking by pressing down the F5 key on your keyboard.
  9. After that, your system will begin to restart in Safe Mode.
  10. Now, you need to check the system to verify if the issue is fixed or not.

In case, if there are no technical flaws with your internet connection in the Safe Mode, then it implies that the third-party software or any other application of the system is the main cause behind this frustrating issue.

Way 7: Disable the Microsoft Virtual WiFi Miniport Adapter

This is the most fundamental steps that you can try to eradicate this issue effectively. Moreover, this is not a troublesome task. In case, if you are using a wireless connection, then the technical error might be caused due to the Microsoft Virtual WiFi Miniport Adapter of the system. To eradicate this issue, you just require to obtain and disable these faulty or corrupted Microsoft Virtual WiFi Miniport Adapters. Here are some easy steps to do so:

  1. Go to the Device Manager.
  2. Whenever the device manager opens, you need to go to View and choose the Show hidden devices option.
  3. Locate the Microsoft Virtual WiFi Miniport Adapter, right-click on it and select the Disable option. Now, you need to redo this step for all the available Microsoft Virtual WiFi Miniport Adapters of the system.
  4. Once all the steps are completed, close the Device Manager window.
  5. After completing all the steps, you need to restart the system.

Summing Up

These are the effective troubleshooting ways in order to resolve the DNS server isn’t responding on the Windows 10 Operating System. Hope, after following-through these troubleshooting ways as described in the above-section and executing them accordingly, you can surely get rid of this annoying technical error on your own. Moreover, this article assists mostly a non-tech-savvy person. Therefore, you do not require any extra technical knowledge to perform the above-mentioned steps.

Try the above-stated ways to resolve this general issue of Windows 10 OS and see which one is giving you the ultimate troubleshooting solution in no time. In case, if you are facing any issue while performing the above-stated ways and steps, then you must post your queries in the comment section below. We will definitely update you within the minimum possible span of time.

Call Now ButtonCall us Now