DNS_probe_finished_bad_config is one of the most uncommon errors and it is a DNS related problem. Once this error occurs, it means that your computer is not able to connect with the website because the DNS or Domain Name Server is not able to resolve website name into IP address or not available at all. There are lots of reasons for getting this error. The error mainly occurs because the function of DNS is to translate or resolve names. This is because the system cannot translate the address and thus this error will appear. But if you are looking for some of the most helpful methods to fix DNS_probe_finished_bad_config Mac error, then try out the efficient hacks which are provided below. Also, here are some possible symptoms and major reasons behind the error. So, read them attentively and fix this issue.
Possible Reasons for DNS_probe_finished_bad_config Error:
There are several causes behind this annoying issue. Take a glimpse below to know them:
- Some problem in your router
- IP address got changed by mistake
- The DNS caches
- Some issues in your hardware
- Improper Internet connection
- Some unauthorized apps
Major Indication of this DNS Error:
When a user encounters this error, typically it’ll manifest itself in the following way:
- The user is refreshing a web page several times before it loads this page properly.
- The browser takes sometimes to load a site and suddenly stop halfway through.
- The DNS server is not responding.
Apply These Easy Hacks to Resolve DNS_probe_finished_bad_config Error:
In this section, we are going to discuss some of the effective fixes to get rid of this error. So, go through the methods step-by-step to get rid of this problem as soon as possible.
Solution 1: Clear the DNS Cache and Reset the IP
The basic thing is to clean up the DNS cache and reset the IP in an accurate way. To perform the whole procedure, you need to go through the steps given below:
- First of all, open the Run box and type cmd in the Run box.
- After that, go to the Command Prompt by right-clicking on it. Now, choose Run as administrator.
- Next, type the following commands in the Command Prompt and hit Enter.
- ipconfig /flushDNS
- ipconfig /registerDNS
- ipconfig /release
- ipconfig /renew
- netsh int IP set DNS
- netsh Winsock reset
- Then, go to the website which you want to browse and check whether the problem still persists or not.
Solution 2: Restart the Router
This is one of the easiest ways to get rid of this DNS_probe_finished_bad_config issue. To restart your router, just follow the below hacks:
- At first, turn off the router or modem by tapping the Power button.
- Then, wait for a couple of seconds and switch on the router again.
- Now, check whether the issue is fixed or not. If not, follow the next method.
Solution 3: Reset the Router’s DNS Settings
If you encounter this problem till now, the next thing is to reset the DNS settings to mitigate the error completely form the system. To perform that, go through the below guidelines one-by-one:
For Android Users:
If you face the DNS_probe_finished_bad_config Android issue, then you must follow these steps:
- Firstly, click on the Start icon and go to your system’s Control Panel.
- Now, choose Networking and Internet and click on the ‘View network status and tasks’ option.
- Then, select the ‘Change Adapter Settings’.
- When you will find Local Area Connection, click on it.
- After that, go to the Properties section and select ‘Obtain an IPv6 address automatically’.
- Next, click on ‘Obtain DNS server address automatically’.
- Press OK.
- Then, select ‘Internet Protocol Version 4 (TCP/IPv4)’, and then go to the Properties section.
- Below the ‘Use the following DNS server addresses’ option, you need to set the DNS server to another available server. The recommended DNS server is Google’s public server: 18.104.22.168 and 22.214.171.124. You can set Preferred DNS server as 126.96.36.199 and set Alternate DNS server as 188.8.131.52. Then, click the OK button.
- Check to see if the problem is resolved.
If you are still unable to access the internet, try to use below DNS server addresses and see if it works. Preferred DNS server: 184.108.40.206
Alternate DNS server: 220.127.116.11
For Mac Users:
If you use a Mac device, just follow the easy steps below to fix DNS_probe_finished_bad_config Mac issue:
- First of all, open the Apple menu and go to the System Preferences section.
- Choose ‘Network’.
- Next, click on the Network which you use and select the Advanced tab.
- When different tabs pops-up on the screen, select the DNS one.
- Now, click on ‘+’ to change or attach any listed addresses with 18.104.22.168 or 22.214.171.124.
- After that, press ‘Apply’ and click on the OK button.
- Now, check the issue once whether it still remains or not.
Solution 4: Reset the TCP/IP
If you don’t provide the proper address in the DNS server, it might create this type of problem. The other important thing is that you can attach other address by the other ISP or DNS including Open DNS or Google DNS. Just follow all the steps to complete this process.
- Firstly, go to the System Preferences option and select the Network option.
- Then, select ‘Wifi’ on the left side.
- Open ‘Advanced’ folder and go the TCP/IP tab.
- Now, type the Router’s address there.
- Open the DNS tab and then point to be noted that with the router address the DNS server is getting filled up by the correct address.
- After that, press the (-) mark and add the DNS server address.
- Lastly, check whether you still confront the same trouble or not. If yes, try to use the next method.
Solution 5: Run the Windows Network Diagnostics
On Windows PCs, Windows Network Diagnostics helps to resolve the internet connection issues sometimes. So, it’s worth a try. Just follow the below instructions one-by-one and apply them in your own way to get rid of DNS_probe_finished_bad_config issue.
- First of all, open the Control Panel option.
- Next, click on the Network and Sharing Center option.
- Then, go to Troubleshoot option under the ‘Change your Networking Settings’ folder.
- After that, select the Internet Connection option.
- When an Internet Connections window shows, press on Next.
- Now, wait for some time to finish the troubleshooting process and notice the exact problems which will show on the screen.
Most of the cases, the extra network connections associated with your device might cause this issue on the system. In this case, turn off all the extra Network connections from your device as this will help you to solve this error. Just follow the steps one-by-one:
- At first, go to the Control Panel section.
- Choose the ‘View network status and tasks’ option which you will find below the ‘Network an Internet’ option.
- After that, open the ‘Network and Sharing Center’ option.
- When you will see ‘Change Adapter Setting’ in the left of the screen, then click on it.
- You can be able to see the list of all the connections.
- Disable all of this one-by-one if any extra connection is placed there.
- At last, it will repair this annoying issue or not. If not, then proceed through the next solution.
Solution 7: Reinstall the Chrome Browser
You can fix the problem by installing the Chrome browser again. So, take a look below:
- Tap the Windows key and X keys at the same time.
- Now, select ‘Control Panel’.
- From Programs folder, open ‘Uninstall a program’ option by clicking on it.
- After that, look for Google Chrome and choose ‘Uninstall’ by clicking on it.
- Next, reboot your PC to save all the changes.
- Now, open Internet Explorer to download the latest version of Chrome in your PC.
- Be sure to install it properly.
- After completing the installation process, close everything and start your PC again.
Solution 8: Clear Browser Cache
Sometimes corrupted cache is the main reason for DNS_probe_finished_bad_config issue. In such cases, the best way to solve the error is to clean all the cookies and browser cache. It is the easiest method so you can attempt it. To do that, you have to go through the below instructions:
- First of all, go to the Browser option.
- Then, open Settings and click on the ‘Browsing Data’ option.
- After that, clear all caches and fix the issue.
Solution 9: Delete all Temporary Files
Basically, the browser contains all the temporary files on your device. It helps to increase the browsing experience. If the files get corrupted, then you can see this DNS error. The temporary files are kept in the ‘Temp’ file in Windows. You can remove them by applying these steps cited below:
For Windows Users:
- Firstly, press and hold the Windows logo key and R key together.
- Now, open the Run dialog box and type ‘%temp%’.
- After that, hit the Enter key.
- When you see temporary files, select them all and remove.
For Mac Users:
- Firstly, press the Shift, CMD and G keys at the same time.
- When a dialog box appears, type ‘~/Library/Caches’.
- When all the temporary files pop-up on the screen, choose them and click on Delete option.
- Finally, check if the issue still persists or not.
Solution 10: Remove Proxy
At times, removing a proxy server can help to fix this issue. So, have a look at the steps below:
- At first, click on the Windows key and R button both.
- Type ‘inetcpl.cpl’ in the Run dialog box.
- Press the Enter key and select ‘Internet Properties’.
- After that, click on the Connections option.
- Choose ‘LAN Settings’.
- Now, unmark the ‘ Use a Proxy Server’ option and then ‘Automatically detect settings’ too.
- Next, press OK and click on Apply.
- At last, restart your device.
Hope this article will help you to mitigate the DNS_probe_finished_bad_config error. The above-mentioned methods are explained in the simplest way so you can fix this problem on your own. If you have any queries regarding this procedure, you can put your feedback in our comment section below.