Windows Error

Learn What To Do When Destination Folder Access Denied?

Whenever you are trying to copy, move, or delete from pen drive or from a shared location to Windows folder destination folder access denied window is showing with the message “You need permission to perform this action”. Basically, the error message appears when there are multiple numbers of users configured on a system. Moreover, you have updated the Operating System and try to modify existing files on your old Operating System on your device. The root cause of this error code is the ownership properties of the targeted folder. Mostly, the problem arises with the properties of the source files.

If you are facing the same error message and do not know how to deal with it, you can refer to this post. Hence, follow this article and troubleshoot the error message.

Simple Ways to Troubleshoot Destination Folder Access Denied

In this section of the article, you will find all the possible effective procedures which will help you to fix the “destination folder access denied” error message in a simple and easy way. Hence, keep reading this article and apply the mentioned procedures as mentioned in the section below:

Procedure 1: Check Connectivity and Sharing

You might get the error message while trying to access a shared folder and files. Hence, there might be a chance for permissions for some other reason on the different computer might have messed up with the system. Therefore, the first method that you need to try is to test the connectivity. If nothing is wrong with the connectivity, then you need to check the Share Permissions.

Also, you need to ensure that both systems are online. Moreover, in this process, you need to refer the computer sharing the folder as the source computer. To perform the action, at first, you need to get all the local IP address of the source computer. The IP address you will obtain by typing ipconfig/all in the Command Prompt. Hence, to apply this on the source computer, first, you need to press the Windows key + R together. It will open the Run dialog box. In the Run box, type cmd and hit the Enter button.

When you obtain the IP address, then you need to move to the host computer where you are getting the error message and send a message as stated below

ping -t ip.address.here

If you receive replies, it means it is connected with the network. It not, then firewall might block it. To ensure that you need to the security software are disabled or not.

When you have done with the test and got a reply from the receiver, next you should check the sharing permission. Therefore, move to the folder that is shared and right-click on it. After that, choose the Properties option. Next, you need to tap on the Sharing or Share tab and select the Share option.

Thereafter, from the Share properties option, you are able to check, add or delete users.

Once you have done with the above procedure, check the error message gets solved. Otherwise, move to the next section.

Procedure 2: Enable Network Discovery and File Sharing

When you are trying to copy or delete any file from the network location, then you need to ensure that Network Discovery & File Sharing is turned on both source and destination systems.

To do so, walk through the steps and fix the issue:

  • At first, press the Windows key and type Network and Sharing Center in the search box. Then, hit the Enter button.
  • From the Network and Sharing Center, select the Change advanced sharing settings option which is available in the left panel of the window.
  • Move the arrow and select the Home or Work option. You need to ensure that the network discovery is turned on. On the other hand, you need to also check that the File and Printer Sharing option is also enabled.

Once done with the above-mentioned steps, try to move or delete any files and check whether you are in the same situation or you are able to send them without the error message.

Procedure 3: Using the Advanced Sharing Option

If you want to access a source file shared with another computer, you can use the Advanced sharing option. To use it, you need to follow the steps as mentioned:

  1. Firstly, right-click on the source files and folders and then, select the Properties option.
  2. From there, select the Sharing tab. Then select the Share option and write the ComputerName or UserName of the user who wants to change it.
  3. If you found that the users are already there, then you can skip the process.
  4. After that, from the Permission Level option select Read or Write. Next, click on the Share option and then press the Done option.
  5. Thereafter, select the Advanced Sharing option and choose Yes if the User Account Control warning appears on the system screen. Press on the Permission option and click Add tap.
  6. Meanwhile, type YourComputerName\YourUserName and hit the OK option.
  7. You need to ensure that in the permission panel, FullControl option is checked under the Allow. After that, select Apply and then to confirm the action press OK.

Once done, exit from the Properties option and check if the destination folder access denied Windows 10 still present or not.

Procedure 4: Turning Off the User Account Control

Sometimes, User Account Control (UAC) deny access to some folders. Hence, you need to disable the option, you can enable it when you get rid of this situation. Hence, follow the steps that are mentioned underneath.

Firstly, select the Start button and type UAC in the search box. As a result, the User Account Control option will open and then click Change User Access Control Settings option.

Secondly, drag the slider from the left panel of the screen and click OK option. When you press the OK button, A UAC warning window will appear and click on the Yes button.

Once done, restart the system and check the error message folder access denied still persist or not. Otherwise, move to the next method.

Procedure 5: Through the Command Prompt

In order to fix the issue, you need to take ownership of the targeted file and folder and grant the full access to the users through the command prompt. Hence, follow the steps,

Firstly, press Windows key + R at the same time and hit the Enter button to open the Run dialog box.

Secondly, type cmd in the Run box and open Run as Administrator option. After that, enter the following command, icacls “full path of file” /grant %username%:F /t to find the full path of the target folder and then expand the folder to proceed further.

Third, you need to select the address bar and copy it. After that, write the full path with the quotes and press the Enter button.

Fourth, when you successfully, executing the above command, enter the second command, takeown /f “full path of file” /r and hit the Enter button.

Fifth, after executing the second code, you can modify the target files. After successfully completed the process, give us feedback about whether this method is able to solve the issue or not.

For your convenience, we have also included some effective procedures in order to fix the Windows 10 destination folder access denied the issue.

Procedure 6: Settings Permission for the User Account

Sometimes, you need to modify the target files to get rid of this situation. To add permission, at first, right-click on the target files which you want to modify and proceed further. After that, open the Properties option. From the Properties option, you need to ensure that the read-only check box is clear.

Thereafter, select the Security tab and then press on the Edit button. Check whether the user name is already on the Groups or user name list, then press on it. You will find the Full Control option and place a check on it. But if you do not find the user name in the list, then you need to add the user name. After adding the user name, click on the Apply option and then press the OK option.

From the Properties option, you will find the “Apply changes to this folder, subfolders, and files” option. Select the option and press the OK button.

Once you are done with the above steps, check whether you are able to solve the issue.

Before Putting A Stop

That is all you need to know about the process on how to get rid of destination folder access denied problem. Apart from these, solutions you can try to update the operating system, disable the antivirus which might help you in order to solve the issue. Nevertheless, if you like the article then, do not forget to give feedback in the comment section below.

+1-888-220-3424 Request Call Back