Type to search

Fix Dell Hard Drive Not Installed Error Through Simple Guidance

There are many users who become frustrated due to the problem with Dell Hard Drive Not Installed Error. When you are affected with this problem, the computer starts up with a message, such as the Hard Drive is not detected boot device found, no boot partition found, missing Operating System, hard disk drive failure, etc., if these messages appear on your computer screen then, this means that, your device is unable to detect the hard drive it uses when it loads.

Here in this article, we are going to do a little something for you and guiding you in resolving Dell Hard Drive not found error. We are going to give you a brief discussion about the Dell hardware issues and its solution with easy guidance. So, if you are dealing with this kind of problem then, the solution is in your hand. Just read our article and resolve the problem on your own.  

The Reasons behind Dell Hard Drive not installed error

Before going to the solution part we must need to know what are the reasons behind Dell Hard Drive Not Installed Error. This might help you to escape the issue. So, here are some of the causes for Dell hard drive issue:

  • The problem might arise due to bad BIOS settings
  • Problem with the loose cable connection might be the reason for this kind of error
  • A corrupted or damaged hard drive registry may occur this trouble
  • If there is a virus in the boot sector, then the problem might arise
  • The broken hard drive is the other reason for this error

Some Efficient Solutions to Fix Dell Hard Drive not detecting error

Here we are going to know the details on “how to fix Dell Hard Drive not installed error?” Read the undergoing text to know the details.

Solution 1: Press the F1 key

You can escape the problem by pressing the F1 key from your keyboard. When you cannot detect the Dell hardware drive at that, moment you should press the F1 key from your keyboard this is a BIOS message. You should keep pressing the F1 key because it is an emergency method that can work around the error. And the processor may store in the Windows perfectly after holding the F1 key.

Solution 2: Fix the Corrupted BIOS Settings

You can resolve the problem by fixing the corrupted BIOS settings. BIOS helps to control the basic setup and boot up the boot process for the computer and begins it to store the operating system. Generally, the hard drives are connected with the onboard a SATA or IDE port. If the connection port is disabled then, the hard drive cannot be detected by the computer. While this situation occurs with your computer, at that moment, you will get the messages like the hard drive not found.

If you are facing this kind of problem then, you should check the BIOS setup. But if, the hard drive contains Windows should appear first on the list. If this did not appear the first on your screen then, you can enter the system’s BIOS set up and you need to change the boot device priority.

Solution 3: Check the Hard drive Port

The problem might arise at the time when the computer is not attached to the hard drive. Thus, you will be able to monitor the cord which connects to the Hard Drive to secure whether it has lost the cable connection or the SATA cable and the power cable is problemmatic. If you are able to reconnect the cables from the hard drive and the motherboard or you can replace the cable wire with a newer one.

Solution 4: Perform the Hard Drive Reset  

If you tried a forced reset then, this might erase all the data and information from your computer’s memory and it may restore the functionality. The resetting of the computer forces the system to remove and restore the software connections among the BIOS and the hardware. If you want to do it then, you can follow the steps given below:

Step 1   

At first, you need to turn off your computer and detach the computer from the port replicator or a docking station.

Step 2

Now, you have to disconnect all the external devices such as USB, CD etc from your system. And you also need to unplug the AC adapter from your computer. Then, remove the battery from the battery chamber.

Step 3

After that, tap and hold the Power button for a few seconds. You need to do it to remove the remaining electrical charge from the capacitors which help to protect the memory.

Step 4

After, completing all the above-mentioned steps, now is the time to insert the battery and to plug in the AC adapter again in your system. But, never connect any of the external devices like USB storage devices, external displays, printer etc.

Step 5

When you are done with all the previous mentioned steps, now you have to turn on your computer. If the Start menu opens then, you have to check it if it is the solid wrong hard drive.

After that, you have to remove the hard drive from your computer and then, connect it with some other device to see whether it works or not. If this does not happen to you then, you have to replace the hard drive with a newer one.

Step 5

Sometimes, the problem may be caused due to bad Window installation this will help you to protect the Windows from storing. At that situation your system might alert the hard drive is not found while booting. If the Window finds the hard drive while running a refresh or repair installation that, means the drive may not be broken. At that moment, you may run a repair or refresh installation to resolve the problem. If you failed to do it then, this might hamper your driver with the boot sector virus that, you need to fix with the hard drive formatting.

Summing It Up

Hope this article will help you to resolve your problem with Dell Hard Drive Not Installed Error. If you have more queries regarding this topic then, you can comment us at our comments section.