Dell is one of the most popular printer manufacturers in the world and the Dell E525W Color Laser All-In-One Printer is one of the most popular printers of it. So, after buying this product, all you have to do is performing Dell e525w color laser all-in-one printer setup process. Well, if you are unaware of this process and want to know the detail information, then you can go through this article. It consists of a step by step guide using which you will be able to perform the action without any hassle.
Dell e525w Color Laser All-In-One Printer Setup: Easy Steps
Here is the expert provided solutions using which, you will be able to perform this particular action without anyone’s help:
Step 1: Verify the Product of the Box
In order to set up your printer, at first, you have to verify the contents of the box as well as you have to read as well as follow the safety instructions and the important information which comes with our printer.
Step 2: Remove the Packing Material
After completing the previous step, you have to remove all packaging materials which comes with your printer properly. You have to remove all the tapes correctly. After that, you will be able to set up your printer.
Step 3: Add Paper
After removing every packaging material, you have to prepare the paper tray and insert some papers in it.
Step 4: Connect the Wires
Now, as per your choice, you have to connect the network wires of your device. In case, of USB cables you have to connect the USB wires and in case of Ethernet connection, you have to connect the Ethernet cable. In case of the fax connection, you have to connect the telephone wire.
Step 5: Turn your Printer On
After completing these steps, you have to connect the power cable as well as turn on the printer. In that case, take note that, if you are turning on your printer for the first time, then, the initial setup wizard will appear in the display panel and if you cannot proceed with the setup within the next three minutes, then, it can happen that, the status of the power changes will become ready to copy. Now, you can run the initial setup again after some time, if it is required using the operator panel.
Step 6: Configure Settings
After performing all of the steps, you have to configure the printer settings, which means, you have to set the languages and the country, time zone and the date and time. After you complete this process, you will be able to set up your printer and your printer will start restarting automatically.
Step 7: Install the Drivers And the Utilities
In order to complete the action, all you have to do it, installing all of the important drivers as well as the utilities. Therefore, insert the software and documentation disk present in your printer. Similarly, you can also go the official support page of Dell and download the latest software and the drivers by providing the service tag of your printer and after that, open the file which you have installed.
In that case, take note that before you begin, as far as a wired printer setup is concerned, be sure about whether the printer is connected with your computer using the Ethernet cable or USB cable. For a wireless printer, you need to ensure that there is no cable connected between the computer and the printer. In order to install the drivers and utility, go to the Dell Printer Easy Install window, and tap on the option which is Next. After that, Dell Printer Easy Install will start searching for your printer. This function is supported for 802.11b/g/n over 2.4 GHz but not compatible with 802.11n/ac over 5.0 GHz. Once done, try to wait, until your Dell Printer Easy Install wizard detects your printer. After detecting, tap on the option named install to complete the setup.
In the case of Ethernet Printer
- Try to wait for the Dell Printer Easy Install wizard, detects your printer.
- Choose the printer after that, tap on the option which is Next to complete the setup.
If you are using the USB printer, then you have to wait for the Dell Printer Easy Install wizard to locate as well as install your printer.
After downloading and installing the printer software, now, your printing device is ready to use.
Here are some expert provided steps, using which, you will be able to perform the setup process with this printer. In order to complete the troubleshooting process, try to go through the steps carefully. Try to avoid step jumping. In case if you encounter any kind of glitches while performing the steps, then you can place a report via your valuable comments. If you get this article helpful, then also you can encourage us with the help of your comments.