Have you ever encountered Canon printer error code 1403? If yes, then you have landed on the correct page. Here, in this post, we have a brief discussion about such a Canon printer error. Just go through this post as we have enlisted some tried and tested methods to fix this issue. But, before that, you need to know the proper reason behind this issue. So, take a glance below and identify the proper reason.
Why Canon Printer error code 1403 Occurs?
When you get stuck with such Canon printer related glitches, then it can be a printer head issue. But, in some instances, there can be a cartridges related problem also.
If your printer’s cartridges get damaged or corrupted, then such kind of error code appears. Basically, this is one of the foremost cause behind almost all printer errors. In that case, you need to be sure that your printer’s cartridges working properly. Otherwise, you have to replace it as soon as possible.
Apart from this, if your printer head is not placed appropriately, then you might get such invalid error code. This is another potential reason for this glitch. Thus, you need to check that the printer head is placed properly in the right place.
These two are the primary causes of this issue. Besides, there can be some other issues as well. Now, let’s proceed to the troubleshooting section.
Step-By-Step to Solve Canon printer error code 1403
If you are having a hard time with such Canon printer Error related issues, then you need to check out this post. Here, in this segment, we have defined the step by step solution in order to fix this problem.
- Primarily, you need to turn off your Canon printer. Then, unplug it from the power outlet. After that, you have t hold the printer and carefully open the prime lid of the printer. Once you are done, simply take hold of the cartridges and the slider. After this process, you need to remove the cartridges and take out the printhead from the printer.
- Now, you need to take cotton then dip it into a mixture of isopropyl alcohol and hot water. Then, carefully clean the printhead with the cotton. Moreover, you have to also clean the cartridges.
- You need to make sure that no ink remains should come out. Now, let the cartridges dry. After finishing the cleaning process, place the cartridges back to the printer and place it along with the printhead.
- Once you are done, you need to be sure that your printhead or cartridges should not open from anywhere. Now, reconnect the printer to the power outlet and turn it on.
We hope, the above-mentioned steps will be helpful for you to solve the Canon printer error code 1403. If you have any doubts regarding the above-mentioned steps or if you have additional queries then you can leave your comments in the comments section below. Moreover, you can also visit our official website anytime.