Type to search

Get Rid Of Error 0xc0000142 With The Most Effective Techniques

In this era of advanced technology, we all are surrounded by the advantages of Computer. To run the computer or to perform an essential task we often need to use some software or application on our computer. But, sometimes users are facing some difficulties while opening an application on their system. ‘The application was unable to start correctly 0xc0000142’ is one of those difficulties faced by several users. It is a common as well as a highly irritating error that affects a type of core Windows apps.

If you face the same error, then nothing to get worried about this. Here in this article, we are going to present some amazing hacks to fix the application error 0xc0000142. Hence, you are advised to go through the article given below. So, let’s start.

What Causes the Error 0xc0000142?

Basically, Error 0xc0000142 is occurred by a failure or malfunction with any program that you are trying to open. Several people report encountering this error while trying to execute ‘cmd.exe’ that is a DOS emulator application for the computer. Although this issue does not specialize the exact problem with the application or system in question, so you can easily solve it by using a standard process.

The most usual reason of error “the application was not able to start correctly 0xc0000142” is damaged or corrupted files that are used by several apps of your computer. Such files are required to use by the computer as well as if the files are being corrupted in any reason, then they will make the system extremely unstable and also cause the error such as the error code 0xc0000142. Hence, go through the steps that are given below to get rid of this error without much trouble.

Easy Tricks and Tips to Fix Error “the Application was Unable to Start Correctly 0xc0000142”:

By now you are aware of the root causes of error 0xc0000142. Whatever the reason is, you need to fix the error to continue your work. Hence, know the easy hacks that are given below to fix the issue on the go.

Solution 1: Perform a Clean Boot

To fix the application was unable to start correctly 0xc0000142, the first fix you need to try is to perform a clean boot of your PC. It will disable the non-windows services as well as startup apps. You can also re-enable these if required. In addition, it will increase the performance of the system by disabling the undesired start-up applications that are not used too much on your computer. You can also re-enable them by performing the same steps as well as check the ones which have been turned off. To perform this, you need to follow the steps given below:

Step 1:

At first, you have to hit the Windows Key and R both at the same time from the keyboard to open the Run Command box. Type ‘msconfig’ in the run dialog box and click on the Ok button. You can also press the Enter key from the keyboard to run the command.

Step 2:

This will start to load the ‘system configuration window.’ From this window, you need to navigate to the Services Tab. Then, tick the ‘All Microsoft Services’ box. Click on the option ‘Disable All.’ Then, you need to tap on the Apply button. Post that, click on the Ok button.

Step 3:

Now, the window will prompt to restart the system. You also will see the option ‘Restart Later.’ Click on it. After that, again you have to run the ‘msconfig’ on the Run Command box. Hence, follow the same process mentioned above to open the Run Command box. Then, type the command and hit the Enter from the keyboard.

Step 4:

When the dialog box of System Configuration will open, then you need to choose the option ‘Start Up.’ Open the Task Manager. Now, look at the last field named Start-Up Impact. Disable all the High Impact files. To disable these files, you need to right click on the file. Then, click on the ‘Disable’ option. It will only disable them from starting up when you restart the computer. Hence, you can still start them up at any time as well as re-enable them in future if you use the app to be started up using the similar steps mentioned above, instead of selecting the disabled, you need to select the Enable.

Step 5:

After completing the above steps, you have to restart the system to save the changes.

After performing the process of the clean boot, you need to check that the error still persists or not. If you see that the error persists then you need to scan the system files. To perform this, you should follow the steps as follows:

First, go to the Start menu. Then, type ‘cmd’ in the search field. Tap on the ‘Command Prompt.’ Now, type ‘sfc /scannow’ in the Command Prompt window and hit the Enter key to run the command.

If the error is still not fixed, then again go to the Start menu and open the Control Panel. Click on the ‘Programs and Features’ option. Navigate to the ‘Uninstall a Program.’ Now, it will show you a list of all programs that are installed on your system. Then, you have to sort the programs by date to separate which ones are installed recently on your computer and is triggered the error 0xc0000142. Right click on it and tap on the option ‘uninstall.’

After performing this, if the error still not gone, then you need to move on to the next solution.

Solution 2: Run the Application in Compatibility Mode

Many users fix the error 0xc0000142 by running the app in compatibility mode. Hence, before going to try any complicated solution you should try this method. To perform this, you need to stick to the steps that are stated below:

  1. At first, you have to move the cursor to the application icon that is not opening and right click on it.
  2. Select the option ‘Properties.’
  3. Then, you have to navigate to the Compatibility tab.
  4. Tap on the ‘Run compatibility troubleshooter’ option.
  5. When the window prompts the option ‘Try recommended settings.’ Click on it.
  6. Now, you need to tap on the ‘Test program’ option. Now, the Windows will attempt to run the program with the settings that are recommended by you.
  7. If the application runs in a proper way, then you should close the app. If the app do not run properly, then go to the next step.
  8. After exiting from the application, you need to click on the Next button.
  9. Now, tap on the Yes button. Save the settings for the app if the app runs properly. Tap on the Cancel button if the app did not run.
  10. Next, you will see the ‘Run this program in compatibility mode for’ option box. Check the box.
  11. Select the Operating System by going to the drop-down menu under the option ‘Run this program in compatibility mode for.’
  12. Now, you have to tick the ‘Run this program as an administrator’ box.
  13. After that, tap on the Apply button. Then, Ok button.

Now, try to open the app to verify that it opens or not. If the error still occurs, then proceed to the next solution.

Solution 3: Download the Files Manually

The application was unable to start correctly 0xc0000142 also occur because of the unauthorized dll files of your computer. Hence, you need to replace those dll files with their latest version that will possibly fix the issue for you. To perform this, you need to follow the steps as follows:

  1. At first, you have to download the latest version of dll files by going to the default browser of your computer.
  2. After downloading the dll files, you need to go to the location where you store the newly downloaded dll files (by default the system store the newly downloaded files on Downloads).
  3. Now, right click on the file and choose the Copy from the list to copy the file. Or if you prefer you can also press the Ctrl and C simultaneously from the keyboard after selecting the new file.
  4. Go to the location where you saved the application which is showing the error.
  5. Right click on the folder. Then, choose the option ‘Paste’ from the list.
  6. After that, the window prompts two options. Then, skip it or replace the files. Here, you need to tap on the ‘Replace the files’ option.
  7. Repeat the above steps for all the dll files that you have downloaded.
  8. After completing this, you need to restart the system once to save the changes.  

Now, check that the error is still showing or not. If you notice that the error still persists, then try the next solution that is given below.

Solution 4: Use the Regedit.exe Command

You can also fix the error 0xc0000142 by using Reget.exe. We can modify the value of the ‘LoadAppinit_dlls key to 0. LoadAppInit_dll’ file. Basically, it is a process that initiates the dlls in its registry keys when the application starts. So modifying the value to 0 might fix the issue.

Steps to Perform this:  

  1. At first, you need to hit the R and Windows key both at the same time to launch the Run Command box.
  2. Then, type ‘regedit.exe’ in the Run dialog box. Hit the Enter or tap on the Ok button.
  3. Navigate to the location ‘HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows’. If you do not know how to go to the location, then you should perform the steps mentioned below:
  • After running ‘regedit.exe’ command, you have to click twice on the ‘HKEY_LOCAL_MACHINE’ option. You will see this on the left side of the display.
  • Now, look at the left side of the screen and double click on the option ‘Software.’
  • Navigate to the left pane of the window and click twice on the ‘Microsoft’ option.
  • Again go to the left side of the display and click twice on the option ‘Windows NT.’
  • Then, open the CurrentVersion folder by double-clicking on it. You will see this on the left side of the display.
  • After that, look at the left pane of the window. There you will see the option ‘Windows.’ Tap on it.
  1. Next, you have to double click on the ‘LoadAppInit_Dll’ option by going to the right side of the display.
  2. Now, change the data value to 0.
  3. Tap on the Ok button.
  4. Save the changes by restarting the system.

Now, you should try to open the application to check whether the error is resolved or not. If the error still persists then follow the methods stated below.

Solution 5: Run the SFC or System File Checker

After trying all the above solution, if you still face the same error, then you need to try to run the System File Checker to check if it can resolve your issue. To run the SFC on the system, you should perform the steps mentioned below:

  1. At first, go to the Start menu.
  2. Type ‘cmd’ in the search field and right click on the ‘Command Prompt.’
  3. Then, you have to select the ‘Run as administrator’ option to run the Command Prompt with administrator privileges.
  4. Type the command ‘sfc/scannow’ in the Command Prompt window.
  5. Now, hit the Enter key from the keyboard to run the command.
  6. After that, you have to wait for a few seconds until the system completes the scanning process.
  7. When the scanning is completed, then restart the system.

Now, try to open the application to check whether the application was unable to start correctly 0xc0000142 is resolved.

On the Whole

In the above discussion, we have provided some of the easiest solutions to fix the error 0xc0000142. We hope if you implement the above methods in their respective order then it will definitely help you to put an end to this error. After successfully performing the above methods if you still face any kind of trouble, then you need to connect with a tech expert. In addition, you can also share your queries and valuable feedback through the comment box given at the end of the post.

 

WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.