Type to search

Error Code 6502 Canon Printer: Get It Off Real Soon!

Though Canon is a leading printer manufacturing company, it is never free from the array of technical glitches. Most of the Canon printer users often complain about the error code 6502 Canon Printer. Basically, the problem with ink cartridges or the sensor is responsible for the error code 6502. If you are a Canon printer user, then you might also face the issue with your printer. It is necessary to take steps in order to fix the issue.

Therefore, if you have no idea how to get rid of the canon printer error code 6502, then stay with this article. We are going to discuss the reasons and effective solutions for the error code 6502.

Probable Reasons for the error code 6502 Canon Printer

To print or scan the hard documents, an essential tool is a printer. But somehow, it may cause some problems while printing or scanning a document. The most common error that the users frequently get is the error code 6502 Canon printer. Hence, every canon printer user is quite familiar with the error code 6502. As a matter of fact, various reasons are responsible for the error code 6502.

Basically, the problem with ink cartridges or sensor is the main reason for the code 6502 to appear. When the error code pops up on the screen, it means that the printer is unable to recognize the ink cartridges chips on your system. Due to this, your printer may stop printing or the scanning operation of any documents.

Another reason which is responsible for the error code 6502, is the blockage of an LED. Mainly, when there is any glue or taps which covered the chip or the LED on the rear of ink cartridges, then you may face a dilemma in the process printing or scanning at the same time. As a result, error code 6502 arises on your Canon printer and scanner.

Therefore, if you are struggling with this error code then you need to follow the below section in order to fix the resolve the error code 6502. Hence, stay tuned with the article.

 

Fix error code 6502 Canon Printer

As the printer error 6502 is quite a prevalent error pestering the users of today, so, in order to troubleshoot the issue, you need to opt for the proper solutions.
Therefore, check in here with this article to know the best solutions to fix the Canon printer error 6502. With the help of the solutions, you will able to resolve the error code with your own.

Method 1: Remove the damaged cartridge

As we have discussed earlier that the main cause for the error code 6502 is the faulty ink cartridges. Hence, to fix the error code 6502, you have to work on the ink cartridges.

Step1

At first, hold the Power button in order to turn off the printer. After that, disconnect all the power cords from the back of the printer.

Step 2

Then, remove the faulty ink cartridges from the inside of the printer. After that, connect the power supply and press the power button for 30 seconds. Then, wait for a while and press the Resume button twice in a row. Doing this, the printer will automatically reset the printer settings.

Then, try to print a page and check the same error message will pop up on the printer screen or not. Therefore, if the solution does not help you to resolve the issue, then try to do another method which is mentioned in the section below.

Method 2: Replace the ink cartridges

To proceed with this method, the first two steps are the same as Method 1. Turn off the printer and disconnect all the power cable and remove the ink cartridge from your printer.

Step 1

After removing the ink cartridges from your printer, plug all the power cable again. After that, turn the printer on.

Step 2

After that, replace all the ink cartridges on your printer and shut the scanner lid or door.
Then, check if the error code 6502 still appears or not.

Method 3: Alternate Method

At first, turn off the power button. After that, press and hold down the resume and power button at the same time. After that, a green light will be on in the printer. When you see the green light, leave the Resume button but not the Power button. After waiting for a while, hit the Resume button twice in a row.

Moreover, you need to wait until the Canon printer settles down. On the off chance that the printer isn’t getting the required power supply and remove the power cable from the back side of the printer. Then, wait for some time. Next, you need to reconnect the power supply and turn on the power.

Hope with the help of the above solutions you will able to solve the canon printer error 6502. Nevertheless, if you face any problem while applying the methods, you need to clear your doubts. You can share your doubts with us. You will try to help you to clear all your doubts related to the error code 6502.