Type to search

Error Code 2000-0146: Solve It With Brilliant Tips And Tricks

Today, we will be addressing a major problem faced by several Windows users on their Dell laptops. Thus, if you are one of the Dell laptop users, then you might come across the error 2000-0146. Whenever you face this situation where you get stuck with this error code 2000-0146, you find that your device randomly freezes and this error also prevents software programs from responding.

This issue is usually related to various factors such as system crashes, system freezes, slow performance issues, issues with the Windows registry, problems with the Hard Drive, virus infection, and Windows issues. On the other hand, the Dell error code 0146 specifies the logs of errors on the Hard Drive that results in the drive-related issues. However, we have enlisted some potential fixes for this issue. Therefore, you can try out those fixes.

Potential Causes for Dell error codes

Encountering an error is always an uncertain thing. However, if any kind of error code occurs, it must be fixed shortly. And every error code happens due to a variety of objects. Therefore, error code 2000-0146 is also one of them. As this error appears due to a number of reasons. To know them briefly, take a glimpse below:

  • Corrupted programs
  • Hard driver related problems
  • Virus or malware infection

These are the most annoying causes behind this Dell errors. Thus, whatever be the reason you have to fix it as soon as possible. Otherwise, this error can lead your device to permanent damages. So, it’s better to fix all the possible factors that can cause such error. So, let’s move on to the next section where we have mentioned all the possible ways to fix this error in no time.

“How to resolve Dell error code 2000-0146?” Check It Here

Here, in this part of this post, you will be able to get acquainted with all the possible fixes for this Dell error code 0146. Therefore, it is advised you to try out all those fixes and apply them in the same order as we have mentioned. Now, let’s check it out:

Fix @1: Run a full system scan

A virus or malware can corrupt or damage the hard drive. Moreover, it also triggers a Dell error code 2000-0146. In such situations, you should remove each and every possible files whihc are corrupted. To do that, you have to run a full system scan on your device. There are multiple third-party security programs around you that you can use. But, we recommended you to use the Windows Defender, as it is the in-built tool which is designed to solve such matter effectively. So, if you want to run this tool then, you have to apply the following steps:

  • At first, go to the Start button.
  • Then, launch the search box where you have to type “defender”
  • Once you are done, you will see the Windows Defender in the result list.
  • Now, simply double tap on it in order to initiate the tool.
  • Next, choose the shield icon that is in the left-hand pane.
  • Now, a new window will open, where you have to navigate to the Advanced section.
  • After that, check the full scan options in order to initiate the system scan.

Once you are done, the Windows Defender tool will scan for the Dell errors. Just then, if you will be asked to Remove or Clean option, then hit that button. Basically, it completely depends on the security programs that you’re using. This process should fix the Dell error. In case this process can’t fix this matter then, try out the next fix.

Fix @2: Run the Disk Checkup

This is another effective fix to resolve such kind of Dell error. According to the users, after running the Disk Cleanup, they find that the error code 2000-0146 gets eliminated. Basically Disk Cleanup is a Windows programs that are designed by Microsoft and it reduces the unnecessary files and folders that are present on your Hard Disk in order to free up the disk space. Moreover, it also erases the temporary files and folder, empties the Recycle Bin and even eliminates the unnecessary system files that can be responsible for such Dell error. Thus, here’s how to perform this action:

  • Primarily, click on the Start icon.
  • Then, go to the search box and type “FDisk Cleanup” and hit the Ener key or click on the OK button.
  • Now, wait for a while in order to scan your drivers.
  • When done, look for the Temporary Files.
  • Once you find it, simply check the boxes and hit the OK button in order to remove or delete.
  • After that, just choose the Delete Files in order to proceed.

Fix @3: Repair PC Registry

After running the Disk Checkup, if the issue still persists then, you need to repair the PC registry. This is the simplest way to repair the corrupted system files. Basically, this utility app varies the integrity of the system files. Furthermore, it also repairs those files which are corrupted or damaged. To do this process, you have to follow the below directions:

  • First, click on the Start button.
  • Then, in the search box simply enter “cmd”
  • Now, hit the Enter button to click on the Ok button.
  • Once you are done, you have to right-click on the Command POrompot and then, choose the run As Administrator button.
  • Next, go to the Run dialog box and enter “sfc/scannow”
  • Then, press the Enter key.
  • Now, you have to wait for a while in order to complete the process. Once the process is over, just restart your device and check if the issue gets removed.

Fix @4: Run the PSA diagnostics

Moreover, you can also fix the error code 2000-0146, by running the PSA diagnostics. It is, in fact, an in-built tool that carries out troubleshooting on your Dell system, besides, it also resolves any problem including the such Dell error codes.

To run this utility tool, you need to restart your Dell device first. Once you device restarts, press the F12 key until you find the Dell logo. Once the Dell logo appears on the display screen, you will see the “One Time Boot” menu, therefore, you have to press the Down arrow to highlight “PSA Diagnostics” button. After this process, simply press the Enter key. Now, the PSA will automatically start. Thus, you have to follow the prompts in order to fix the issue you are facing.

Fix @5: Use the CHKDSK on Boot

CHKDSK is a utility tool that is usually used to check drives for damaged files, bad sectors, internal bugs, and glitches. Basically, it will be run via the Command Prompt, run as an Administrator, that could be easily accessed with the recovery DVD. This process helped many users to resolve their issue and boot into the normal state.

Therefore, insert the fresh installation drive and turn on your Dell device. Now, you have to launch the Command Prompt window. To do so, you have to follow the steps:

For Windows XP, Vista, 7: Once your device restarts, you will be asked to select the preferred language and some other necessary settings. Now, enter them carefully and select the Repair Your Computer button, that is at the bottom of the setup’s window. When you will be prompted with Restore Your Computer or Use Recovery Tool, keep the first radio button selected. Once you are done, just, hit the Next button. Now, you will be asked to select the Command Prompt with a recovery list, simply click on it.

For Windows 8, 8.1, 10: Once your system restarts, you will see a keyboard layout windows, just click on that windows and then look for the Troubleshoot button. Now, simply click on the Troubleshoot button from the result list and then go to the Advanced Settings. Here, in the Advanced Settings, you need to select the Command prompt.

Once the Command Prompt opens, simply type “CHKDSK  /R C:” and hit the Ener key. Now, if you will be prompted that all handles will be invalid then, hit the Y letter on your keyboard to continue the process. After that, boot into your device by entering “Exit.” Now, check if the problem resolves.

Fix @6: Reset the BIOS settings

BIOS consists of the system settings that diagnose the performance and functionality. So, in order to fix such Dell error, you might be required to reset BIOS settings to default state on your Dell device. Thus, if you want to perform this fix, then follow the passage below:

Firstly, restart your Dell device then until you find a System Setup screen window, press the F2 key simultaneously. Now, select the Right Arrow and wait until you locate the Exit menu. Once you find the Exit menu, simply press the Down Arrow to choose the Load Optimized Defaults button. Once you perform this action, just, press the Enter keys or click on the OK button.

Fix @7: Run System Restore in Safe Mode

This is another good way to resolve such kind of Dell error codes. Basically, after running the system restore in Safe Mode, most of the users have reported that their Dell device related issue resolves. So, in order to revert back to a certain restore point, you can also perform the system restore in Safe Mode. To do so, follow the steps below:

  • At first, restart your device and navigate to the Run in Safe Mode option, then hit the Enter button
  • Now, go to the Start icon and enter “System Restore” in the run dialog box.
  • Then, just click on the OK button or hit the Enter key.
  • After that, in order to revert back to a certain restore point, you can follow further prompts.
  • Now, you have to wait for a while in order to finish the process, then just reboot your device.

Note-  Before the error message appears again, you need to make sure that you’re able to recognize the proper restore point date. Thus, system restore doesn’t affect any of your documents, files, and personal data.

Fix @8: Run your device in Safe Mode and Clean Boot

Additionally, you can also resolve this issue by running your device in Safe Mode and In clean boot. However, you have to make sure to remove or disconnect all the connected devices such as the router, Wi-Fi adapter, Modem, and other external devices.

Once you are done, simply restart your device then, press the F8 key. Now, the Windows logo comes up, thus, choose the “Safe Mode With Networking” and press the Enter button. After that, navigate to the Start button and press the Windows + R function keys simultaneously. Now, in the search box, enter “msconfig” then, hit the Enter in order to open the System Configuration Utility. After this process, go to the General tab followed “Selective startup” Therefore, look for the Load Startup Items box. Now, be sure to uncheck the box. If not then, uncheck the box. Next, tap on the Services. After that, find the Hide All Microsoft Services box. Once you find that box, simply check that box in order to disable all. Now, check if the issue gets removed.

Finally:

After you have gone through the difficult set of solutions above, if your hard disk shows almost no signs of life then, you can get in touch with an expert who can assist you to solve this matter immediately. On the other hand, if you have any confusion regarding the apple mentioned solutions, then you can also leave comments in the comments section below.

WordPress › Error

There has been a critical error on this website.

Learn more about troubleshooting WordPress.