Type to search

How To Perform the Dell Laser Printer 1700 Setup?

Get All The Errors Solved with ErrorCode0x, Call Us Now :

As first of all you have to do is, performing dell laser printer 1700 setup. If you are unaware of this process, then you can follow this article. It provides the step by step guide using which, you will be able to perform the action without any hassle. So, let’s start with the process.

Dell Laser Printer 1700 Setup in a Flicker

To perform the setup process with the laser printer, you should try to follow the steps mentioned below:

Step 1: Unbox your Printer

To perform the setup process with your Dell printer at first, you have to unbox your printer and remove the packaging it. After that, you have to connect your printer to the wall socket.

Step 2: Load the Paper

After unboxing your printer, you have to load papers to the printer. In that case, take note that you have to use standard papers only. After that, you have to turn on your printer and set it up.

Step 3: Install or Re-install a Printer on Windows 8 and Windows 10 using a Wired or Wireless Network

If you have already installed a printer in the system, then, try to fully uninstall the driver as well as the other software before reinstalling process. After that, follow the instructions given below.

  • At first, tap on the Start button and then, tap the Windows button from your keyboard. After that, type “control panel filter” to the control panel icon.
  • Once you are able to see the control panel launches, then, try to choose the devices and printer options.
  • In the top of the menu bar, tap on the option named Add a Printer.
  • Now, you will be able to see the Add Printer dialogue box opens and will start searching for the available printers. Now, tap on The printer that I want isn’t listed”, in order to set up your printer.
  • Choose to Add a printer option using the TCP/IP address or hostname and click Next.
  • In the IP address field or in the hostname, you have to enter the Ip address of the printer. Now, make the box be unchecked against, Query the printer and you will be able to choose the driver which you can use and then, try to tap on the option against, next.
  • When prompted, in case of additional port information under the Device Type, choose the Standard and Generic Network Card after that, tap on Next.
  • Tap on the option against Have Disk.
  • Tap on the option Browse
  • Go to the extracted files as well as tap on the option against Open.
  • If you notice that, the driver is in the few directories step, then, you have to select the Printer folder first.

Note :

The instructions provided in this step, are provided using the one driver package as an illustration. As per your driver package, the folder structures may vary.

Previously, we have selected a choice between the PCL (Printer Command Language) and PS (PostScript) drivers. But in this example, we are choosing the postscript.

Language options are present, wherein our example it is English.

Here, the Operating Systems are also common, for this example we have selected WINXP_VISTA_64 meaning 64-bit drivers for Windows 2000, XP and Vista. In your case, if you are using the newer version, then, you have to use the latest OS version with the correct architecture.

  • Now, you have to choose the driver (*.inf) file, in this case, dp5330.inf, and tap on the option named Open.
  • In the install section from the Disk dialogue, tap on the option against OK.
  • In some cases, take note that, some driver packages can include drivers for more than one model or variation. Now you have to choose the correct model from the list if applicable, and tap on the option against Next.
  • If you notice that your printer name is changed, then if desired, then you can leave this as default then tap on the option against Next.
  • Select if the printer is shared with the help of the PC acting as a print server, then tap on the option named Next.if you are not sure to share, then, you have to select Do not share this printer option.
  • Tap the option named Print a test page and then, go for the option against Finish to exit the wizard

In this way, you will be able to set up your Dell printer in Windows.

Download and Install Dell printer driver on Macintosh

If you are going to install and download the Dell Printer Driver, then you have to go to the official site of Dell and have to choose:

Download and Install the Dell Printer Driver

Download the Dell Printer Driver from the Dell Support Site. Once done, follow the Installer Wizard and complete the installation process.

Add a Network Printer using IP Address/Hostname

In order to add a network printer in Mac, try to follow the instructions given below.

  • At first choose the Apple icon, which is situated in the upper left corner and tap on the option against System Preferences.
  • Select Print & Fax.
  • Tap on the + (plus) icon, which is situated below the Printers pane on the left to open the Add Printer application.
  • Select the IP, which is situated on the top of the toolbar of the add printer window.
  • Choose the following options.

Protocol: set to Line Printer Daemon.

Address: set to the printer’s IP address or hostname.

Queue: leave it blank (default queue).

Name: In this case, it will enter the IP address of the printer and in this case, it is recommended to change the name of it to a friendly name like Dell Printer or Dell Printer.

Location: you can leave it blank. Commonly used to identify the physical location of the printer. For example the front office.

Print Using: In this case, tap on the down arrow to show the full list of the drivers and choose the appropriate driver. Tap on the option against Add

If there are options for the printers which you are installing, (Duplexer, optional paper trays, memory, etc.), you will be able to see it on the screen. It will allow you to choose the option which is installed in the computer and tap on the option against Continue to complete the task.

Add a USB Printer

In order to add your printer via USB, try to follow the steps mentioned below:

  • At first, tap on the option named Apple icon which is situated at the upper left corner. Choose the option against System Preferences.
  • Tap on the option against Print & Fax.
  • Select the + (plus) icon below the printers section and open the Add Printer application.
  • Choose the default option which is situated in the top of the toolbar of the add printer window.
  • Choose the printer from the list of all of the printers which your Mac can see via USB, Bonjour, and so forth.
  • Tap Add.

If you notice that, there are options for the printer which you are installing,(Duplexer, optional paper trays, memory, etc.., then you will be able to see a screen which will allow you to select the printer options which you have installed on your printer. Tap on the option which is installed on the printer. Tap on the options which are installed in your computer, then, tap on the continue button to complete the setup.

Select Printing Options

  • Within the application, you have to select the  File option which is situated at the top of the menu bar.
  • Now, choose the Print or press Command + P from the keyboard.
  • Choose the correct print queue.
  • Tap and hold the Show Details button.
  • Now, you will be able to see all printer options will be available to be selected.
  • Tap on the Print to send the print job.

In this way, you will be able to complete the task, hassle-free.

Summing it Up

Here are some expert provided steps, using which, you will be able to resolve this particular issue without any hassle. In this case, try to follow the reach and every step carefully. It is recommended, not to jump any one of them. In case, if you encounter any of the system glitches while performing the steps, then you can leave a comment in the comment section, describing the issue which you are facing. If you find this article helpful, then also you can encourage us with your valuable comments.