Type to search

Dell E310dw Printer Setup : Essential Methods At Your Fingerprints

In today’s world, printers serve varied work requirements at home or in the workplace. Nowadays, the installation has been streamlined to a great extent. While you can install some of the printers automatically, connecting the printer to an existing network or sharing the device with the users can be a little tricky. If you have recently purchased a Dell E310w printer and unable to set up the printer, you need to perform the Dell E310dw printer setup as soon as possible. Also, you can execute your printing jobs from any corner of the world. In this article, we will walk you through the simplest procedures of setting up your printer. Since most of the advanced printers support both wired and wireless printing these days, it is important to know the setup process. Follow the guide in detail and clear all your doubts.

Prepare for Installation

If you have purchased a Dell E310w printer and trying to set it up for the first time, you need to perform some basic steps. You need not worry because here, we provide you the easiest process for the Dell E310dw Printer Setup. So, take a look below:

Step 1: Unpack the Printer from the Box

At first, remove the box and unpack the printer. Remove all the tape that is near the cartridge and paper tray.

Step 2: Plug the Device to a Power Source

Next, plug in the printer to a power source and power the device On. If you have followed the previous steps carefully regarding the Dell printer setup, you will find no difficulty in applying the rest of the procedures.

Step 3: Install the Cartridges and Align them properly

Once you have connected the printer to a power outlet, you need to open the access door of the ink cartridges. Before you proceed further, wait until the cartridge gets idle. Before you insert them into the carriage, you need to remove the tape present on the cartridge. Then, close the door and go through the instructions that appear on the screen. In order to test the print quality, the printer may print an alignment page. Now, follow the guidelines that appear on the alignment page to complete the rest of the process.

Step 4: Load Paper into the Tray

Depending upon the type of the printer, load a stack of white paper in the main paper tray and continue to push them till the tray is loaded. Here, gently slide in the papers until they fit perfectly against the edges of the tray.

Apply all the steps and it will surely benefit you to set your Dell printer without any difficulty.

Effective Ways to Configure Dell E310dw Printer Setup

For an error-free operation, you need to setup Dell E310dw printer setup in a proper way. Here are the easy and quick methods to set up wirelessly. Take a look below to learn the method:

Dell Printer Wireless Setup

  • First of all, turn on the printer and a computer, connecting with the wireless network.
  • Now, insert the Software and Documentation CD of your Dell printer into the disk drive of the computer. Or, you can install the Dell printer software and driver.
  • Then, try to follow the instructions and accept all the terms and conditions of the License Agreement.
  • After that, connect your computer and the printer with the USB cable. If the pop-up instructions prompt you to disconnect the cable, then unplug them.
  • When you have done it, configure your printer and adjust the cartridges.
  • So, click on the Start button and select Control Panel.
  • Now, click on the ‘Devices and Printers’ option.
  • Choose ‘Add a printer’.
  • Then, select your printer from the given list.
  • When the Add Printer Wizard appears, choose the Manufactures and model number of your printer.
  • Select ‘Ok’ and click on ‘Finish’.

Add your Printer through Wireless

  • Make sure that you connect a USB cable between your printer and the system.
  • Then, click on the Start button.
  • Select ‘Programs’.
  • Click on the ‘Dell Printers’ and choose ‘Dell Printer Home’.
  • Select the Settings tab and choose ‘Wireless setup utility’.
  • When the Wireless Network Name appears in the list, click on the network.
  • Press ‘Continue’ and type the Network key.
  • When the Dell software window appears, click on ‘OK’.
  • Lastly, remove all the cables and check if the Printer is set up on the wireless network or not.

Key Points to Consider while Downloading & Installing the Printer Software

In order to connect the printer to your PC, at first, you need to go to the option ‘Software & Driver Downloads’. If it prompts a message for the printer model, enter the information and confirm the OS version you are using. Next, you need to download the correct printer software and driver as recommended for the system. In case, you don’t have the exact disc and the printer was not installed automatically, you can download the drivers from the manufacturer’s website directly. Search for the latest version of the printer driver and update it accordingly. To download and install the software, you need to go through the guidelines mentioned below:

  • First of all, open the official website.
  • Now, go to the Download section.
  • Then, you will see the ‘Full Driver & Software’ Package.
  • Just download this package.
  • On the download page, you will find all the installation guide for your printer.  

Important Notes:

While executing the above steps, keep in mind that the particular PC in which you are installing the software must be connected exactly to the same network where you have connected the printer. To do so:

  • Browse through the on-screen instructions until you get the prompt displaying ‘Connection Type’.
  • Now, select any one of the options ‘Through the Network’, ‘Network’ or ‘Wireless’ when prompted.
  • Finally, keep an eye on the on-screen instructions to complete the installation of the software.

If your Dell printer is already connected to the initial network, then it will get automatically discovered during the installation. Sometimes, the software finds it difficult to locate the printer over the network. If this is the case, you have to perform an ‘advanced search’ for locating your printer by using the exact IP address.

If this is the first time, the printer is installed without a display and you are using the USB set up of the wireless method, the particular software will fail to locate the printer on the network. Accordingly, you will be prompted to create a wireless connection for the printer. Here, all you need to do is connect a USB cable between your printer and the system for a temporary basis. Remember not to connect the USB cable until the software asks you. Now, the whole setup process is complete. You can enjoy a hassle-free printing session after installing these drivers.

Hope, the guide was helpful in assisting you with the Dell E310dw printer setup. In case, you fail to understand any method or need further clarification, feel free to share your doubts in the comment section.