Type to search

Learn The Compelling Ways For The Canon Pixma MG2900 Printer Setup With Ease

Canon Pixma MG2900 printer model is really one of the most craved for by the users among the list of the printer models available on the market. For its exceptional performance, it is being widely used by lots of people across the globe. This MG series 2900 printer model of Canon is featured with the latest and exclusive technologies that add a lot of conveniences. In this advanced world, printers are one of the foremost peripheral to print photos and documents.

However, if you have got yourself a Canon Pixma MG2900 wireless printer model and you want to figure out how to set it up. Then, this article will provide you the simple process you need to carry out the Canon Pixma MG2900 printer setup. Therefore, go through the following section to know the effective steps to set up the Canon Pixma MG2900 all-in-one printer model.  

Three Effective Ways for the Canon Pixma MG2900 Printer Setup

You may come up with the various types of configuring steps to set up the Canon Pixma MG2900 all-in-one printer model. But, you need to try some easy and effective steps which can ensure the premium solutions on time. In this article, we are going to discuss all the possible steps on the Canon Pixma MG2900 printer setup, so that you can perform it without a dint of worry. So, let’s start to set up the Canon Pixma MG2900 all-in-one printer model by following the below-stated steps:

Way 1: Wireless Set Up Process

To configure your Canon Pixma MG2900 printer model with the help of cableless setup process. Then, you need to go through the following steps. The steps are described hereunder:

  1. Before starting the Wireless setup process, at first, you need to make sure that the Canon Pixma MG2900 printer is turned on. Moreover, you need to check that the power LED light of the Canon printer model is blinking.
  2. After that, you need to press and hold down the Wi-Fi button of your Canon Pixma MG2900 printer model until the Alarm LED light of the printer blinks for two times. After blinking the Alarm LED light, you need to release the Wi-Fi button of the printer while the Alarm LED light flashes for the second time.
  3. Now, you need to make sure that the Wi-Fi LED light of the printer beams quickly and the power LED light of the printer is lit.   
  4. Once you are done, return back to the application screen of your Canon printer model and proceed further along with the configuration process.
  5. Now, you can check your Canon Pixma MG2900 printer model to see that it is properly configured.

Way 2: Set Up the Canon Pixma MG2900 Printer Model using Wi-Fi Protected Setup (WPS) Process

To configure your Canon Pixma MG2900 printer model with the help of the Wi-Fi Protected Setup (WPS) process then, you need to go through the following steps. The steps are stated hereunder:

  1. Before starting the setup process using the WPS, at first, you need to make sure that your Canon Pixma MG2900 printer is turned on. Moreover, you need to check that the power LED light of the Canon printer model is blinking.
  2. After that, make sure that the button on the access point is active to be pushed.  
  3. Now, you need to press and hold down the Wi-Fi button of your Canon Pixma MG2900 printer model until the Alarm LED light of the printer blinks once. After blinking the Alarm LED light, you need to release the Wi-Fi button of the printer.
  4. After that, you need to make sure that the Wi-Fi LED light of the printer beams quickly and the power LED light of the printer is lit. Once it is done, press and hold down the button on the access point within 120 seconds.
  5. Once the above four steps are complete, you need to make sure that the Wi-Fi LED light and the power LED light of the printer are lit.   
  6. Now, you can check your Canon Pixma MG2900 printer model to see that it is properly configured.

Way 3: Set Up the Canon Pixma MG2900 Printer Model using Wi-Fi Protected Setup (PIN Code) (WPS) Process

To set up your Canon Pixma MG2900 printer model with the help of WPS PIN Code configuration process then, you need to follow below-discussed easy steps. The simple steps are as follows:

  1. At first, you need to press and hold down the Stop button of your Canon printer model until the Alarm LED light of the printer blink for more than 15 times. After the flashes, you need to release the Stop button whenever the Alarm LED light will blink on the fifteenth times. Now, the PIN code along with the wireless connection setting information of your Canon printer model will be printed.
  2. After that, you need to press and hold down the stop button on your Canon printer model until the Alarm LED light of the printer will flash for sixteenth times. After the flashes, release the Stop button whenever the Alarm LED light will blink on the 16th times.
  3. Now, you need to follow the on-screen prompts on a particular device such as a Smartphone. The on-screen instructions will help you to configure the Wi-Fi Protected Setup PIN code which is mentioned on the printed Network Configuration Page to the access point.
  4. After that, you need to make sure that the Wi-Fi LED light of your Canon MG2900 printer is blinking.
  5. Now, you can check your Canon Pixma MG2900 printer model to see that it is properly configured.

Now, the Canon Pixma MG2900 printer setup process is done. You can try to print photos and documents with your Canon Pixma MG2900 wireless all-in-one printer model effectively and hassle-free.

Wrapping Up:

These are the ways by applying which you would be able to learn to set up the Canon Pixma MG2900 all-in-one printer model easily. Moreover, the above-mentioned steps are practical and effective regarding the Canon Pixma MG2900 printer setup. Moreover, you do not require any extra technical knowledge or skills to perform the steps which are stated above. Therefore, try the above-mentioned ways and see which one is giving you the ultimate solution on time. In case, you face any confusion or trouble while executing the above-mentioned steps, please let us know in the comment section below.