Type to search

A Comprehensive Guidance On How To Perform Canon mg3520 Scanner Setup

Canon  mg3520 scanner is one of the most popular scanners from the wide range options of Canon. After you buy this product, you can not use it until and unless you have set up and configure this device correctly. At first, all you have to do is to perform a Canon mg3520 scanner setup, then only you can continue to scan images and documents with this scanner. If you are unaware of this process, then you are in the perfect page. This article contains step-by-step guidance which will help you a lot in performing the complete setup procedure of the Canon scanner. So, try to follow this article to the end and execute the steps below to do this properly.

Restrictions for the Setup Process:  

Before you attempt to perform a setup process of your scanner, you have to take care of some restrictions mentioned below:

  • If you are trying to connect another device with the scanner while it is connected to the scanner, then you have to connect it using the same connection method as per your connected device.
  • In case, if you connect this device using the different connection method, then you can notice that the connection of the device will be turned off.
  • If your printer does not support a wired connection, then it will not be able to perform a wired network connection.

After knowing the restrictions, now let’s focus on the steps to perform the actions on your own.

Canon mg3520 Scanner Setup: Effective Steps to Execute

Here are some expert steps using which you can easily perform the Canon mg3520 scanner set up on your own.

Connect using Wireless Router

  • You will not be able to use the Wi-Fi and via wired LAN connection (Ethernet cable) at the same time.
  • Be sure that the device is connected to a wireless network. If you want to know how to check the settings, then you have to see the user manual. The one which was delivered along with your wireless router,
  • In that case, take note of the router functions, setup procedures, the configuration of the network devices. As all these might vary as per the system you are using.
  • Once done, you have to check whether your device supports IEEE802.11n (2.4 GHz/5 GHz), IEEE802.11g, IEEE802.11b, or IEEE802.11a (5 GHz).
  • In case, if you notice that, your machine is set to the “IEEE802.11n only” mode, then you will not be able to use WEP or TKIP as a security protocol. In this case, you have to change the security protocol for your device. You can change it to something which is other than the WEP and TKIP. Otherwise, change the settings to something which is other than “IEEE802.11n only.”
  • Now, the connection between your device and the wireless router will be temporarily disabled while the settings are changed. In that case, try not to proceed to the next solutions of this guide. Proceed until you become able to complete the setup procedure.

Connect using a Wireless Network

If you are trying to connect your Canon scanner by using a wireless network, then take note that in this printer, you will not be able to connect over the Wi-Fi and via wired LAN connection (Ethernet cable). In that case, if you are using a router, then you have to connect your scanner and a device to the LAN connection.

Once done, you will be able to perform the action on your own.

To Conclude

In this support article, experts have provided complete step-by-step guidance for Canon mg3520 scanner setup. By using this information, you will be able to set up your Canon scanner without any hassle. In order to complete the process hassle-free, you have to follow each and every step carefully. It is recommended not to jump any one of the steps. If you encounter any kind of glitches while performing the steps, then leave a comment in the comment section below. If you find this article helpful, then also you can encourage us via your valuable comments.