Type to search

Brother HL-2270DW Printer Setup Guide [Step-by-Step]

In this fast-pacing world of digitalization, printers are an essential technological device. Printing machines are high in demand in the market. And this is quite obvious because the device helps you print your documents at the wink of an eye. Besides, over time we have seen the revolutionization of the printers at an unimaginably breakneck speed.

And when talking about the best printer brands, Brother printers surpasses all other competitors. Modeled with innovative product design and top-notch features, Brother printers are certainly an epitome of innovative excellence. And the cherry on the top is that with every new model, it simply gets better. In this light,  Brother hl-2270dw is a class in itself. Modeled with exquisite features, the model is known for its multi-functional deliverables.

However, like every technological device, it is not free from glitches. And when talking about glitches, one of the greatest problems with the Brother hl-2270dw is its network problems. But the chances of such problems gets minimized if you know the ways for the Brother hl-2270dw printer setup.

Brother hl-2270dw Printer Setup: A Thorough Guide

Although there are multiple strategies of Brother hl-2270dw printer Setup, in this section, we are only going to offer you the ones that are proven and most befitting for you. So, without any further ado, let us proceed.

First Things First

Before you begin with the actual setup process, you must ensure that your printer is connected to your router by means of an Ethernet cable. And in addition to this, prior to beginning with the setup procedure, you must gather the undermentioned settings for your network:

  • SSID or Network Name
  • Encryption Mode
  • Network Security Key (password)
  • Authentication Method

Furthermore, in case you have installed your printer previously, we strongly recommend  you to first uninstall your printer device from the system by adhering to the instructions cited below:  

  1. First and foremost, you will have to choose the option entitled Print & Scan”. You should not have any problem locating the option as you will find it under the Hardware Section of System Preferences. The moment you click the option, you will find a list of the printer drivers that are already installed to your system appearing on the left-hand corner of the “Print & Scan” Window.
  2. Following this, you are required to press upon the printer which you want to delete from your system. When you click on it, the selected printer is going to get highlighted.
  3. Once this is done, you must click on the button with the “-” symbol. You will find this button below the list that contains the printer drivers that are already installed in your System. The moment you press on it, all the information pertaining to the printer is going to get erased or deleted from the specified list.

Now, with the removal of the printer from the list, you are all set to configure the Brother Printer.

Stepwise Instructions for Brother hl-2270dw Printer Setup

After going about the initial steps of Brother hl-2270dw printer Setup, you are required to proceed with the remaining steps. And essentially speaking, the actual setup process begins on successful completion of the initial stage. And since you are done with the initial stage, let us move into the main course of the action. Keep reading:


Step 1:  Try Resetting the Network Cards or the NIC to Factory Default

To configure your Brother hl-2270dw Printer, you must reset all the essential network settings. By this, we mean all the IP addresses, as well as the passwords, needs to be restored.to Factory settings. In order to do the same, adhere to the instructions given below.

Turn in your System and after that click on the Go button and turn on the power button of the machine. Note that you need to press and hold the button till the Drum, Toner, as well as the Error LEDs, are powered on. However,  Ready LED is going to be turned off. You may release the button as and when all the LEDs are turned off. Following this, you need to press on the button for about 6 times to reset the Network Card of your printing machine.

Step 2: You Must allot your Printing Machine a Proper IP Address

On completion of the first step, move on to the next step that follows. In the following step, you must assign a proper IP Address to your printer. In order to do the same, obey the instructions that follow:

Connect your printing machine to a router by means of an Ethernet cable for a temporary time period. In order to do so, you must remove the preservative cap from the Ethernet port. You are going to find the Ethernet port at the back of your Brother printing device. After that, you need o to connect your Ethernet cable from the router to the Ethernet port.

After you are done, you must hold on with patience for around a minute. Thereafter, you will have to print the report of Network Configuration in order to check whether your Brother printer has received a proper IP Address.

In order to print the report of the Network configuration, you will have to click on the Go button thrice within just two seconds. Failing which, you will receive a notification intimating you that your action is “timed out’ and you will have to cancel the entire process and do it all over again. On successful execution of the action, your printer settings report is going to get printed and the Network Configuration report will be included within it.

Step 3: Configuration of the Wireless Card Within the Brother Printer:

This is the last and final step of Brother hl-2270dw Printer Setup. In order to go about the configuration process, go about the following steps:

Right at the beginning, you must initialize the Web browser on the computer device. Once it is launched, you need to feed in the IP Address of your Brother Printer Settings Report into the address bar of the Web browser and hit on the Enter Key thereafter. As soon as you do this, you will find the Brother Web Management screen appearing before you.

Once it appears, you will have to press on the “Network Configuration” icon which is located at the topmost menu bar. Following this, you got to enter your Username as well as the password in their respective places and press on OK.

You may use “admin” for your Username and set the password as “access”. After you have put your Username and passcode correctly, you will have to press on the  “Configure Wireless” icon.

Other Steps To Follow

Following this, you must select “Infrastructure” as your “Communication Mode” After this, you must press on the “Browse” button. You shall be able to locate this button next to your SSID or Wireless Network Name. Then you are supposed to choose your Network Name from the SSID list and then hit the OK button.  

Following this select the Authentication Method. Thereafter, you should choose the Encryption Method. Once done, you must insert the Network Key name as well as the Password. After putting in the details, you simply need to press on the Submit button. Once finished, you should disconnect your Ethernet cable form your Brother Printer device.

On completion of the entire process, you need to hold on for a couple of minutes for your System to execute the action properly. Thereafter, print the report of Network Configuration in order to ensure that your Brother Printer has got hold of a functioning IP Address from your Network router.

Concluding Note

With this, its time for us to wrap things up. We are certainly hopeful that our article is going to prove immensely beneficial to you. Furthermore, this article will help you derive a thorough knowledge of the methods to consider for the purpose of Brother hl-2270DW Printer Setup. So, take note of the easy tricks we suggested and try to implement them properly.

The action strategies we offered shall serve your purpose most effectively. Therefore, read through them thoroughly and acquire full command over the tips so that you can adopt them fairly.