Many users encounter various technical issues while setting up their Belikin C65 router on their device. Before proceeding towards the router setup, you need to check the connection between the devices. Any wrong steps can lead you to the permanent damage of both the router and your system. Hence, if you want to know the procedures regarding how to do the “Belkin C65 router setup?”, follow the article which consists of correct information. Here, you can learn all the details about how to configure the Belkin C65 router with ease.
If you are searching for an effective procedure for Belkin C65 router setup, then follow the steps which are mentioned in the understated section:
Mainly, there are two ways in order to configure the Belkin wireless router:
(i) Using the setup CD that came with the router.
(ii) Manually setting up your router.
Here, we have mentioned all the two processes in order to set up the router.
At the time of purchasing, you will get a setup CD. You just need to insert the CD in your system, you can easily configure the router. Hence, you need to follow the four steps which are mentioned in the section below, to set up the Belkin router with the help of the CD.
(I) Check the Internet Connection,
(II) Connect the devices,
(III) Setting up using the router’s CD, and
(IV) Connect wireless devices.
The first step is to check the internet connection of your system.
In the next steps, first, you need to unplug the modem before connecting to the modem with the router. After that, disconnect the router with the power source.
Before connecting to the wireless devices to the router, you should provide the default Network Name(SSID) and password. You need to verify from the router label. You can find the network name and password in the bottom of the router’s box.
When you get the default Network Name and password, then you are ready to install the Belkin router on your system.
In the taskbar, right-click on the WiFi icon and go to the manage wireless network. After that, select Home network. If you want to put the password for security, you can. When you put a password, no other will not access your network.
You can also install the Belkin router by manually. To learn how to do it manually, follow the steps mentioned below.
Step 1: At first, connect your system to the Ethernet cables of the router.
Step 2: Then, open a web browser and enter the router’s IP address in the address bar which will be available in the Router box. After that, hit the Enter button.
Step 3: Next, in the upper right of the screen, you will find the Login option. Click on that. Then, you have to put the default username and password. You can change the username and password. After that, hit the Submit button to log into your account.
Step 4: In the Internet WAN section, select Connection type and then hit the Next option.
Step 5: At last, enter the details which are available in the ISP section and hit the Apply Changes option.
Now, your system is able to connect with the internet. You can check the Internet Status. It will show that the router is connected with your system.
Sometimes, it is difficult to set up a Belkin C65 router setup without any guidance. But after reading this article you can easily set up the Belkin router without any trouble. Hence, apply the steps in order to start a new journey with the Belkin C65 router.