Belkin Router Setup

Belkin AC750 Wi-Fi Dual-Band AC Router Setup : The Ultimate Startup Guide For Users

The Belkin router has made their place in the list of the best routers for homes and office purposes. The Belkin uses the best communication technology that makes its routers class apart among their rivals. Therefore, if you have a Belkin and want to know the steps to set it up, then you can take the help of this article. This article of Belkin AC750 Wi-Fi Dual-Band AC+ Router setup will provide you with best setup techniques. Therefore, stick to this article until the end to learn the Belkin router setup process.

Additionally, we will discuss the reasons why you need to setup your Belkin router. After discussing the reasons, we will be moving towards the setup process of the Belkin AC750 Wi-Fi Dual-Band AC+ Router.

General Reasons why you need Belkin AC750 Wi-Fi Dual-Band AC Router Setup

The most common reason where the users often seek for Belkin AC750 Wi-Fi Dual-Band AC+ Router setup is when have made a recent reset to their Belkin router. Resetting the Belkin router means that the router is set to the default factory settings. Therefore, in order to use the internet through the router, you need to set it up. The second reason is that as if you have recently bought a Belkin router, then you need to set it up. If you do not setup your Belkin router then hackers can easily target it and can corrupt your system. Therefore, it is essential to setup the Belkin router before using the internet.

As you now know the reasons for setting up the Belkin AC750 Wi-Fi Dual-Band AC+ Router, we may now proceed to the methods that will help you to perform the setup process.

Some Quick Methods to Setup the Belkin AC750 Wi-Fi Dual-Band AC Router

Now in this section of the article, you will get to know the steps to perform the setup process. Please note that you have to follow each and every step to get the results of the setup process. Therefore the methods that you will follow are given down below:

  1. Setting up the Belkin Router through the Dashboard.
  2. Setting up the Belkin Router using the Setup CD.
  3. To set up the Belkin Router without using the Setup CD.
  4. Setting up the Belkin Router with the Cable Internet service.
  5. Setting up the Belkin Router by connecting the Wireless devices.

Method 1: Setting up the Belkin Router through the Dashboard

In this method, you will learn to set up the Belkin router through the Dashboard of the Belkin setup page. Therefore, without any delay let us discuss the steps that are given below:

  • Connect the Belkin router to your laptop or computer through the Ethernet cable.
  • After that, you have to launch a web browser and then you have to enter the IP address of the Belkin router. You need to enter the IP address in the address bar of the tab. Note that the default IP address of the Belkin router is 198.168.2.1.
  • After entering the Belkin router’s IP address you need to hit the Enter key from the keyboard. Now the Belkin router’s Welcome page will appear.
  • In the next step, you have to click on the Dashboard option. When the Dashboard section opens, you have to click on the Advanced Settings option.
  • After that, you have to open the WAN Settings and then you have to click on the ISP Connection Type.
  • Inside the ISP Connection Type section, we have to select the Internet Connection Service that you are currently getting from your ISP.
  • After entering the required information you have to click on the Save option.
  • Now, connect your modem to the Belkin router and then restart all systems.
  • Finally, check if you can run the internet on your laptop or computer.

Now your Belkin AC750 Wi-Fi Dual-Band AC+ Router is successfully configured and it is ready to use. Additionally, you can also try out other methods to set up your Belkin router.

Method 2: Setting up the Belkin Router using the Setup CD

In the second method, you will get to know the steps to setup the Belkin router by using the setup CD of the Belkin router. Therefore, have a look at the steps that are given below:

  • First, connect the computer or laptop to the Belkin router and the modem by using the Ethernet cable.
  • In the next step, you have to insert the Belkin router’s setup CD into the computer or laptop. Wait for the CD to open.
  • Now, you have to click on the Setup icon in the CD menu.
  • When you are prompted, enter the default Network Name or the SSID and Password in the box. After that, you have to click on the Next button.
  • Wait for a while until the process finishes its work. When the process finishes, you will get a Success message that you are connected to the Internet.

So, this is how you can setup the Belkin AC750 Wi-Fi Dual-Band AC+ Router using the Setup CD of the Belkin router. Also, there are some additional methods that you can have a look.

Method 3: To Set Up the Belkin Router without using the Setup CD

In the next method, you can setup the Belkin router without using any setup CD. Therefore, to perform the process you can follow the steps that are given below:

  • Again connect the computer or laptop to the Belkin router and the modem by using an Ethernet cable.
  • Now you have to open a web browser and then you have to type http://router or 192.169.2.1 in the address bar of the web page. Hit the Enter key from the keyboard.
  • When the Let’s connect to the internet page opens in a web browser, you have to click on the Detect my connection option.
  • Now, the system will check for the connection and then for the firmware updates.
  • Once the connection has been established, you will be prompted to modify the Network Name and Password.
  • After entering the information, you have to click on the Save and Continue option. Now you have to wait for the router to verify the Network Name and Password.
  • After the verification is done, you have to click on the “Great, what’s next?” option.
  • In the next step, you have to fill up the information to register your Belkin router. However, you can avoid this step if you do not want to register.
  • If you have completed the registration process, you can click on the Complete Registration option.
  • Finally, you have to click on the Thanks, take me to the dashboard button.

So, this is how you can set up your Belkin AC750 Wi-Fi Dual-Band AC+ Router without using any Belkin router’s setup CD. If you want to know more setup methods then you can follow the next section of the article.

Method 4: Setting up the Belkin Router with the Cable Internet service

In this method, you will get to know how you can setup the Belkin router through the cable internet service. Therefore, in order to perform the process, you need to follow the steps that are given down below:

  • In the first step, you need to connect the computer or laptop to the Belkin router. Then you have to connect the Belkin router to the modem. For all these ‘connections you have to use the Ethernet cable.
  • In the next step, you have to provide the power source to the whole setup system.
  • Next, you have to open any web browser on your system. When the web browser opens you have to enter “http://192.168.2.1” in the address bar of the tab.
  • In the next step, you have to hit the Enter key from the keyboard.
  • Once the Belkin router’s web-based setup page opens, you have to select the Login link on the upper right corner of the page.
  • Now you have to leave the Password field as blank and after that, you have to click on the Submit button.
  • On the next step, you have to click on the Connection Type option under the Internet WAN tab which is present at the left pane of the page.
  • In the next step, you have to select your Connection Type. For the cable ISPs, you have to click on the Dynamic option from the list.
  • After that, you have to click on the Next button. Now on the next page, you have to enter the Host Name in the field provided.
  • Next, you have to click on the Apply Changes option in order to save all the changes.
  • Then you have to check if you are connected to the Internet.

If you are connected to the Internet, then this means that your Belkin router has been successfully setup. However, we have another method to set up the Belkin router in case you were unsuccessful in setting up the Belkin router. Therefore, in order to know the method, you need to follow the next section of the article.

Method 5: Setting up the Belkin Router by connecting the Wireless devices

In the method, you will get to learn how to set up the Belkin AC750 Wi-Fi Dual-Band AC+ Router by connecting the wireless devices. If you don’t know the steps, then we will help you out. Therefore, the steps to follow are given down below:

  • In the first step, you have to unplug the modem from the power outlet. Next, you have to connect your modem to the Belkin router by using the Ethernet cable.
  • After that, you have to plug the modem to the power outlet and then you have to wait for about 30 to 40 seconds. Wait till the modem powers up.
  • Now you have to plug the Belkin router to the power outlet and then wait till the Belin router’s LEDs are solid.
  • In the next step. You have to connect the Belkin to your laptop or computer through the Ethernet cable.
  • Now, you have open the WiFi settings from the wireless device. In the next step, you have to turn the WiFi on and then after that, you have to tap on the wireless network name of the Belkin router.
  • Next, you have to enter the password of the wireless network in the Password field and then tap on the Connect button.
  • Then you have to wait for the network connection to establish. Once the network connection is established, you have to open the Belkin router’s setup page.
  • After opening the Belkin router’s setup page you have to carry out the setup process.

After finishing the setup process of your Belkin router, you can now use the internet from the Belkin router. So, therefore, this is how you can setup the Belkin router through the wireless devices.

Steps to Reset the Belkin AC750 Wi-Fi Dual-Band AC Router

If somehow your Belkin router is infected by a virus or it is not working then you can reset it. Therefore, if you don’t know the steps to reset then follow the next section of the article. In the next section of the article, you will get to learn the steps to reset the Belkin AC750 Wi-Fi Dual-Band AC+ Router. Therefore the steps are as follows:

  1. First of all, you have to press and hold the reset button of the Belkin router for about 30 seconds while it is powered on.
  2. While holding the reset button, you have to unplug the power cord of the Belkin router and then again wait for about 30 seconds.
  3. While still holding the reset button of the Belkin router, you have to plug in the power cord and then turn on the router. Now you can leave the rest button of the Belin router.
  4. In the next step, wait to see the LEDs of the Belkin router are solid or not. If the LEDs lights are solid then the Belkin router is now reset.

After you finish the rest process, now you can proceed to setup your Belkin AC750 Wi-Fi Dual-Band AC+ Router by following the above setup methods.

The Bottom Line

So, we are here at the end of the article and we hope that you were to setup the Belkin AC750 Wi-Fi Dual-Band AC+ Router on your own. In case, if you were not able to setup your Belkin router then you can get back to us through the comments section below. However, it is recommended that you must follow each and every step of the setup methods to get the best results.

Call Now ButtonCall us Now
error: Content is protected !!