Type to search

Belkin AC1900 Router Setup With FiOS: A Practical Guide

Verizon FiOS is basically a fiber optic cable for your phone and internet. This service is very much similar to any other home internet cable which runs off fiber optic cable. In today’s era, it is proven to provide the fastest internet services.

Belkin AC1900 router can be extremely helpful if you connect it with the FiOS. If you are having any kind of trouble to set up this router with FiOS, then you have arrived just at the right page. In this article, we are going to discuss all the possible steps that will surely help you in the process of Belkin ac1900 router setup with Fios.

The Requirement of a Secondary Router:

One common question that may arise on your mind that is it necessary? Well, you will get your answer here. Most of the users use a secondary router for securing their system. Such a common example of this type of system is a coffee shop, a large hotel, and many others.


Before you Start:

Before going to the setup procedure little things that you should keep in mind, they are:

  • Just make sure that you have a strong internet connection
  • You have to note down of your Belkin router’s default network name and password which you might see  at the bottom of your router
  • Also, go through a physical checkup and ensure that all the connection is ok.

Now, have a look at the possible steps listed below to get your queries resolved.

Get Informed of the Belkin AC1900 Router Setup with Fios in Minutes?


In a home, it is not compulsory that you should have a secondary router. However, some houses need them for their personal use. Suppose, one member is consuming an enormous amount of data and needs a security upgrade, then he/she can rely on another router.

Now, go through the practical steps in order to complete the Belkin ac1900 router setup with Fios process. Check them out:


Step 1- Initial Verizon of the Wireless Router Setup


At first, you have to complete the setup procedure of your first router. To do so, you need to plug the Ethernet cord in the color-coded port on your router. Also, you have to plug the free end inside the wall Ethernet outlet.  After that, you should plug the Verizon router into the power for activating the wireless signal.

Now, open a machine and operate the wi-fi settings to find out the available networks.  You can see the wireless settings on the back side of your router. You can see the network as ESSID  and the password is WPA2. This starts the temporary network.

Then, you need to open a web browser and type activatemyfios.verizon.net in the address bar and click the Enter button. After that, a new page will pop up on your screen, where you can set the network name, password as well as any custom settings.

Step 2- Belkin Router Setup


The Belkin router extends the wireless capacity. The secondary router is extremely useful on a busy network where a lot of users might activate at the same time. Now, you need to match the IP address of the Belkin router with the Verizon FiOS router. Thereafter, you should combine an Ethernet cord between your primary router and the computer. After that, go to the Start Menu of your computer and choose RUN, then type CMD in the search box. Then, you should press the Enter button to open the command prompt window.  Now, you have to type ‘ipconfig’ within the given field and again hit the Ok button.

You have to note down the Subnet Mask and default gateway. Then, disconnect the Ethernet cable from the primary router and plug it to the Belkin router. Note the IP address that might be written on the backside of your primary router.

Thereafter you should enter the username and password for opening the Settings option. Then, you should select a static IP address. After that, you need to write the Subnet Mask and recorded gateway info. Then, use to match the router IP and then apply these changes in Settings.

Step 3- Reboot your New System

Turn off your computer and both the router. You should make sure that all the connectors and cables are properly connected. Then, completely reboot the whole system. After that, the Belkin ac1900 router setup with Fios will surely be completed. The new changes should improve the capability of the routers.  It also increases the number of peoples as well as increases the overall range of your network.

Now, we believe that with the help of the above steps you can easily set up this procedure on your own. However, if you think you dont have much technical knowledge or you cannot apply those steps on your own, then we suggest you to not to waste your valuable time. Trust on a reliable professional to complete the procedure without any hassle.