Arris is one of the best manufacturers in providing network devices such as modems and routers. There are several models of Arris modems, Arris TG3482G or XB6 is one of them. It allows the users to connect to the internet, from your smartphones and also from your home network. So, you won’t require another broadcast router.
Furthermore, the Arris modem comes with DOCSIS 3.0 technology. This is the standard industry facilitating high bandwidth data transfer for the users who are using cable TV systems.
It is an all-in-one device. Here you will also get the Embedded Multimedia Terminal Adapter or EMTA technology that allows you the facility to make calls over it. The other essential thing about this device is that you can also use this as a router. Using this device, you will be able to connect a lot of systems or devices with the same network.
If you are unaware of how to log into the Arris modem, then you can have a look at the rest of this guide. Here you will receive a step-by-step procedure through which you will be able to log into the Arris TG3482G Router easily.
To log into the Arris TG3482G Router, you just need to have the below things:
To access the default login gateway of your Arris TG3482G router, you can perform the steps that are as follows:
First of all, turn on your computer and then open a web browser. Then, type the default IP address of your device. Here, the IP address of your Arris XB6 router is 10.0.0.1. Otherwise, you can also type “https://10.0.0.1” in the address bar and hit the Enter key from the keyboard. It will navigate you to the default login gateway of the router.
Now, you will get the Password and Username field. Here, you have to provide the password and username of the router to open the login screen. If you are using the Arris XB6 for the first time, then you can use the default password and username of the router.
You can check the default Password and Username on the box of the TG582n router. Else, you can check the documents that come with the device.
Note: The above combination of password and username are correct in 84% models of Arris router.
If you don’t change the default password and username, then anyone will be able to predict the default password and username. Hence, it’s always better to change the default password and username of the device to avoid any unwanted login attempts.
There are some essential points that you need to keep in mind while setting the password and username of the device.
You might see several network name in the Network tab. These network names are called SSID or Service Set Identifier. Usually, the SSID is the name of the brand which produces the device. Hence, in this case, Arris is the Service Set Identifier of your device. But, there are options that you can change the SSID of the device easily. Because, if you don’t do this, anyone will be able to guess your details.
After changing the SSID of your router, you have to secure the settings of the device. You will see the encryption settings of the network on the default gateway login page. Choose the WPA2-PSK encryption from the list of options as the current industry standard. It will make sure that the router is running at the advanced security level.
Users of the Arris TG3482G router face several problems while using this device. Here in this section, we are going to describe some of the most reported problems and their possible solutions.
The default passcode of your Arris XB6 router is “admin.” If you see that this password is not working, then it might be due to the fact that you change the password previously. You can get rid of this problem easily by performing a reset of the router. To do this, press the Reset button on the router by using a pin or paper clip and hold it for a minimum of 30 seconds.
First, you need to try to memorize the document where you have written the default passcode. If you are unable to get that document, then you can contact the Xfinity forums or Internet Service Provider to know if you can use the default password of any other models. If nothing helps, then you can reset the device to solve this problem.
The resetting process is quite easy and simple to perform. You can do this by following the steps given below:
If you face any kind of problem while applying the above steps or if you have any queries regarding this model, then you can share that in the comment section given at the end of this guide.