Type to search

192.168 2.1 Login: Default Router Admin IP Username And Password

The IP address 192.168 2.1 is used for the systems like SMC, Siemens, Edimax, Belkin, and other different routers model. The range of the IP address 192.168 2.1 is set by IANA to delay the lack of range of IPv4 addresses. You can’t use this IP address to connect with any devices that are beyond your home network. 

If you want to configure the router to make any changes in the settings, every time you will have to log into the admin panel of the router. Here in this guide, we are about to discuss how to protect your router from any unwanted login. Furthermore, you will also get to know some of the possible passwords and usernames in the below guide. Password and Username

All the modems and routers have the default IP address and default login credentials that you need to use while accessing the settings of the router. The IP address is one of those that is used to access the settings of the routers such as Westell ADSL modems, ADSL routers, 3Com routers, 2Wire, TP-Link and so many more. 

There are some prerequisites that you must need to consider to access the default login gateway of the router. They are: 

  • A computer that is connected with the wireless network of your home. 
  • A computer where you can open a web browser. 

Easy Steps to Log into the IP Address 192.168 2.1

To log into the IP Address 192.168 2.1, you can perform the steps that are described as follows: 

Step 1: Open a Web Browser

First of all, turn on the computer and open your favored web browser. Then, type the default IP address of the router in the address bar. Hit the Enter key from the keyboard to open the login page. 

Step 2: Enter the Password and Username

If you have just purchased a new router, then you must have the default password and username. Find out the default password and username of the router from the list below: 

admin admin
admin password
user user
user password
admin Michelangelo
admin 12345
admin 123456
admin 1234567
admin 12345678
admin 123456789

Note: Most of the time, the login credentials are printed on the box of the router. But, if you don’t have the box with you, then you can perform a reset of the device. To do this, press the Reset button using a pin or paper clip and then hold it for a minimum of 12-16 seconds. Once the resetting process completes, you can type the default login credentials. It is a simple way to access the official website of the device. 

Step 3: Change the SSID

You can see the SSID name by going to the Network tab. It’s always recommended to change the Service Set Identifier or SSID even if you are using a private IP address for the network.

Important Tips: 

  • Try to set the Service Set Identifier simple and short, but hard to guess for any third-party users. 
  • There is a chance of backfire, so, don’t make it too quirky. 
  • Avoid using any private data while setting the network name. 

Step 4: Change the Default Password and Username 

All the routers come with a unique IP address. But, to enhance the security level, you need to change the default login credentials of the device. 

Important Tips: 

There are some essential things that you need to keep in mind while changing the default password and username of the router. They are: 

  • The passcode must need to be a combination of special, alphabet, and numeric characters. 
  • The password must need to have 8-16 characters. It needs to be complex, but easy to memorize. 
  • Make the username simple and user-friendly. 

The new Passcode and the Username that you set needs to be written down somewhere. 

FAQs: Some Common Problems and their Solutions

Users face several difficulties while logging into the IP address 192.168 2.1. Some of the common problems are discussed below along with their possible solutions. 

Why Can’t I Connect to Router:

Most of the time, users become unable to connect to the default login gateway due to a mistype. Hence, you have to confirm that there is no semicolon in the IP address that you type. The appropriate IP address is ‘’ 

How to Change the Password for the IP Address 

In the beginning, you need to access the default login gateway using the IP address If you are using a direct Wi-Fi and TV and trying to connect to the home network, then you can select the ‘Wireless Router’ option. It will prompt you to enter the ‘Device Code.’ Enter it in the specific field. Now, if you want to change the Name, you can do it. Lastly, tap on the Save button to apply the changes. 

If you wish to change the default passcode of the IP address, then you can choose the ‘WPA/PSK encryption settings.’ It will highlight the password that is grayed out. Now, type the new password in the and then tap on the Save button to complete the process. 

Forgot IP Address Password and Username

After buying a new modem or router, you will get the default login credentials printed on the box of the device. If you are unable to get that on the box, then you can contact the Internet Service Provider to get the default login credentials. 

  • If you never change the default password and username of the router previously, then you can find it from the above table. 
  • If you have changed the default password and username of the router, then Reset is the only option to get back the default password and username of the router. 

How to Reset a Router?

If you perform a reset of the router, then it will erase all the previously saved settings and details of the device. It will also get back the device into the factory settings of the router. 

  • First of all, turn off the router. 
  • Afterward, press the Reset button using a needle, paper clip or pin and hold it for a minimum of 12-16 seconds. Once you see that the router is powered on, release the Reset button. 
  • After releasing the Reset button, you have to restart the device. 
  • Now, you can connect the router using a network cable or wireless connection. Then, log in using the default login credentials.