In case you have either a Telkom or a D-Link network router, you will have to log in to the web interface to use them. You can find all the necessary information right here.
The most important reason for which you might log in to the router interface is for configuring the device.
For this, you might need to deal with various configurations in the router. So, the router’s web interface is going to help you with that. Let’s find what you need to know about accessing the Telkom or D-Link router using the 10.0.0.2 IP address.
A Background on the 10.0.0.2 IP Address
You might have seen different IP addresses while using the Internet. To be more specific, you might have noticed many of them that start with 10.0.0.2.
This particular group of IP addresses includes various private and business networks. Hence, big brands like Telkom, D-Link, and Micronet use IP addresses from this range. So, if you have any of these routers, then you will be having an IP address from this series.
10.0.0.1 IP Address vs 10.0.0.2 IP Address – What is the Difference?
Here you are going to find out about the actual differences between these two IP addresses, which are 10.0.0.1 and 10.0.0.2.
The first thing to take note of is that 10.0.0.1 IP address serves big networks. Like the ones that businesses would use for their offices.
Here, default IP address “10.0.0.1” will indicate that router firmware is exclusively for subnetting. The same concept is going to apply to the other devices that fall under the framework of such organizations.
On the other hand, the 10.0.0.2 IP address is used by many leading router brands like Micronet, Edimax, Siemens, etc. By using this address, you can easily prevent any network conflict and facilitate the smooth flow of communication.
Whenever there is a heavy load on 10.0.0.1 IP addresses, users have the option to choose the 10.0.0.2 gateway for accessing the router and configuring it.
Specific Uses of the 10.0.0.2 Router Login
There are many critical uses for the 10.0.0.2 router Login. Have a look at some of the most important uses here.
Wifi Protected Setup Procedures
In order to use network router devices properly, you can use the WPS mode to carry out the setup. Since it is going to be vulnerable to security breaches from various sources. Besides, most technicians would recommend using the WPS mode to set up your router.
For DNS and Proxy Settings
There is an entire system for converting IP addresses from numerical elements to alphabets. That involves technology, which we call DNS, the acronym for Domain Name Server.
If there are certain settings you want to change in it or to alter any of the settings under the proxy server, you have to log in to the interface using this IP address.
DHCP Settings
The Dynamic Host Configuration Protocol (DHCP) is the server that assigns various IP addresses. Because of this, your device is able to connect to the other devices within the network. To find out any information that you have to regard this, you will need to login to the interface.
IP Quality of Service
This is a feature that helps maintain network connection performance even with simultaneous heavy usage.
For this purpose, you have a set upper limit and a lower limit for the bandwidth you get. To make any changes to the configuration, you have to log in with the IP address.
Login Process for Routers Using 10.0.0.2 IP Address
Here, we are going to learn about the log-in process for both D-Link and Telkom routers with the help of the 10.0.0.2 IP address. So, go through all the steps very carefully.
Login with 10.0.0.2 IP Address in D-Link Router
D-Link is one of the well-known brands that manufacture various types of network devices. The 10.0.0.2 IP address is generally used to construct various networking components like IP QoS, Domain name and its Proxy settings, Wireless fidelity protection system, WAN, LAN settings, and many more.
The steps to log in to the D-Link router are as follows.
- Open a web browser and type your default router IP address in the address bar, then press the “Enter” key.
- The log-in page will appear in front of you. Enter the details and log-in to the router’s setup page. Now, open the LAN configuration settings and enter “10.0.0.2” in the IP address section. Save the changes and close your browser.
- Again double-click to open your browser, enter 10.0.0.2 in the address bar and hit the Enter key.
- The router setup page will automatically open. The default username is “admin” but, keep the password space blank for D-Link routers. So, insert these log-in credentials and sign in.
In case if you forget your log-in id and password, try to remember it whether you have written it somewhere. You can also reset your router and reconfigure it to set a new log-in id and password.
Login with 10.0.0.2 IP Address in Telkom Router
When you are about to log-in to the Telkom router with a 10.0.0.2 IP address, you don’t have to follow any other steps. Just go through the previous section and you will be able to succeed very easily.
In case if you forget your log-in id and password, then we are providing you the default log-in credentials of Telkom router. The default username of Telkom router is blank (means empty or white space) and the password is “admin”.
After logging in, you can change the id and password according to your wish. However, make sure you note it down somewhere so that you can find it easily.
How to Change the Password of a D-Link Router?
In this section, we will list the specific process that you will need to change the password of your D-Link router. Carefully, go through this information and execute the steps to obtain a new password.
- Open your default browser and type the router’s IP address and press Enter. The router’s log-in page will appear on the screen.
- Type your log-in credentials and click on the “Log-in” button. You can now access the entire setup page of your router device as an Administrator.
- Find and choose the “Setup” tab and scroll down until you see the “Manual Wireless Network Setup” button.
- Click to open it and you will see the “Pre-shared key”. Your old password is visible in big dots. So, clear out all the large dots or the old password and enter a new one.
- Now, click on the “Save” button to apply these changes.
Note: As the user interface might change due to continuous upgradation of the router’s firmware, the “Setup” might be available as “Settings” some time.
After changing the password, make sure to reboot your D-Link router to implement the new changes.
The password changing process for Telkom router is more or less the same. If you get a clear idea from the D-Link section, then you will not face much difficulty while changing the password for your Telkom router.
