10.0.0.1 is a default IP address that is used by numerous devices. This IP address basically provides you access to the private configuration pages in routers like Micronet, Siemens, Edimax, and more. With this access, you can tweak some changes in your router accordingly.
If you are a geek with some Networking knowledge, then you must know about this particular address. However, if not, then don’t worry. We’ll provide you a detailed guide about this IP address and how to proceed with 10.0.0.1 login as Admin.
Some 10.0.0.1 and 10.0.0.0.1 IP Address Features
This particular IP address directs you to the configuration page and local settings options of your modem. From here, you can make changes in your router settings as per your requirements. Here are some of those specific areas that you can alter with the Admin panel:
- Password and the login details of your router
- Set up a new network
- Change the router name or SSID
- Enhance the safety of your network
- LAN, WAN, and WLAN settings
- Set up customer parental controls
- DNS and Proxy
- Set up static as well as advanced DNS.
- Change the Comcast or Xfinity router login page (from 10.0.0.1 Xfinity/10.0.0.1 Comcast to 10.0.4.1 or 10.125.3.1)
- Port forwarding for games
Now, let’s take a look at the login credentials for your Xfinity or Comcast router that are provided by default.
10.0.0.1 Default Router Login and Password
Every router manufacturer uses a unique set of default login username and password. Hence, it is not possible to list down each login details. However, we are mentioning some of the most common default login combinations. So, you can try them out in case you forget your credential details.
- admin/admin
- admin/password
- admin/[none]
- [none]/admin
- recovery/recovery
- root/[none]
- root/root
- [none]/[none]
You can pick any of these combinations for logging into your router’s web interface.
Simple Guide to 10.0.0.1 Login
If you’re an Xfinity or Comcast user and wish to log in to the admin pages, here’s what to do:
Step 1
At first, connect your router to your computer or laptop. You can use the Ethernet cable or the wireless network to establish the connection.
Step 2
Now, make sure to turn on both the devices. Thereby, open the web browser of your choice on the computer. In the address bar of the web browser, type 10.0.0.1 and press the Enter button.
Step 3
After this, find out the default login username and password for your router. You will find this in the rear end of the router device. Next, put these details in the provided space whenever you are asked for it. You will now be able to access the router’s settings page.
Step 4
Once you enter the web interface of your router, make the necessary changes that you wish to make. Finally, click on the ‘Save’ option to apply the changes that you just made.
Now that you have full access to your router, be careful not to share the details with anybody else. Also, do change the password from time to time to maintain the security parameter of your router.
In case, you can’t find the default IP address, then you can use the Command Prompt application. Simply type ‘ipconfig’ in the Command Prompt and press Enter. You will see a list of IP addresses. Then choose the one named ‘Default Gateway’ under Ethernet Adapter.
We hope that this article will help you to carry out the process of 10.0.0.1 Xfinity Comcast router login.
